chore: add all the roles

some via submodules

roles/fastnetmon/README.md

@@ -0,0 +1,9 @@
+# ansible-fastnetmon
+this role builds fastnetmon from source on a fedora machine
+
+## License
+GPLv3
+
+## Author
+wanderer@git.dotya.ml
+

roles/fastnetmon/defaults/main.yml

@@ -0,0 +1,22 @@
+---
+fastnetmon_clone_dir: /tmp/fastnetmon-ng
+netflow_on: on
+netflow_port: 2055
+
+ban_time: 1900
+
+ban_for_pps: on
+ban_for_bandwidth: on
+ban_for_flows: off
+
+threshold_pps: 20000
+threshold_mbps: 1000
+threshold_flows: 3500
+
+threshold_tcp_pps: 100000
+threshold_udp_pps: 100000
+threshold_icmp_pps: 100000
+
+ban_for_tcp_pps: on
+ban_for_udp_pps: on
+ban_for_icmp_pps: on

roles/fastnetmon/tasks/main.yml

@@ -0,0 +1,40 @@
+
+---
+- firewalld:
+    port: "{{netflow_port}}/udp"
+    permanent: true
+    state: enabled
+
+- name: check if fastnetmon dir exists
+  stat:
+    path: "{{fastnetmon_clone_dir}}"
+  register: dir_present
+
+- name: get fastnetmon sources
+  shell:
+    cmd: git clone https://git.dotya.ml/wanderer/fastnetmon-ng {{fastnetmon_clone_dir}}
+  when: not dir_present.stat.exists
+
+- name: build and install fastnetmon
+  shell:
+    cmd:
+      cd {{fastnetmon_clone_dir}}/src;
+      git checkout fresh-ndpi;
+      git apply patches/dev-ndpi.patch;
+      cmake -D"USE_NEW_ATOMIC_BUILTINS=ON" -D"ENABLE_AFPACKET_SUPPORT=ON" -D"ENABLE_GOBGP_SUPPORT=ON" -D"BUILD_PLUGIN_RUNNER=ON" -D"BUILD_TESTS=OFF" -DCMAKE_CXX_FLAGS="$CMAKE_CXX_FLAGS -Wall -Wextra" . &&
+      make clean fastnetmon all install
+    chdir: "{{fastnetmon_clone_dir}}/src"
+
+- name: run ldconfig
+  shell:
+    cmd: ldconfig
+
+- name: copy config
+  template:
+    src: fastnetmon.conf.j2
+    dest: /etc/fastnetmon.conf
+    mode: '0755'
+    backup: yes
+  ignore_errors: true
+
+

roles/fastnetmon/templates/fastnetmon.conf.j2

@@ -0,0 +1,320 @@
+{{ ansible_managed | comment }}
+###
+### Main configuration params
+###
+
+### Logging configuration
+
+# enable this option if you want to send logs to local syslog facility
+logging:local_syslog_logging = off
+
+# enable this option if you want to send logs to a remote syslog server via UDP
+logging:remote_syslog_logging = off
+
+# specify a custom server and port for remote logging
+logging:remote_syslog_server = 10.10.10.10
+logging:remote_syslog_port = 514
+
+# Enable/Disable any actions in case of attack
+enable_ban = on
+
+# Enable ban for IPv6
+enable_ban_ipv6 = on
+
+# disable processing for certain direction of traffic
+process_incoming_traffic = on
+process_outgoing_traffic = on
+
+# How many packets will be collected from attack traffic
+ban_details_records_count = 50
+
+# How long (in seconds) we should keep an IP in blocked state
+# If you set 0 here it completely disables unban capability
+ban_time = {{ ban_time }}
+
+# Check if the attack is still active, before triggering an unban callback with this option
+# If the attack is still active, check each run of the unban watchdog
+unban_only_if_attack_finished = on
+
+# enable per subnet speed meters
+# For each subnet, list track speed in bps and pps for both directions
+enable_subnet_counters = off
+
+# list of all your networks in CIDR format
+networks_list_path = /etc/networks_list
+
+# list networks in CIDR format which will be not monitored for attacks
+white_list_path = /etc/networks_whitelist
+
+# redraw period for client's screen
+check_period = 1
+
+# Connection tracking is very useful for attack detection because it provides huge amounts of information,
+# but it's very CPU intensive and not recommended in big networks
+enable_connection_tracking = on
+
+# Different approaches to attack detection
+ban_for_pps = {{ ban_for_pps }}
+ban_for_bandwidth = {{ ban_for_bandwidth }}
+ban_for_flows = {{ ban_for_flows }}
+
+# Limits for Dos/DDoS attacks
+threshold_pps = {{ threshold_pps }}
+threshold_mbps = {{ threshold_mbps }}
+threshold_flows = {{ threshold_flows }}
+
+# Per protocol attack thresholds
+# We don't implement per protocol flow limits
+# These limits should be smaller than global pps/mbps limits
+
+threshold_tcp_mbps = 100000
+threshold_udp_mbps = 100000
+threshold_icmp_mbps = 100000
+
+threshold_tcp_pps = {{ threshold_tcp_pps }}
+threshold_udp_pps = {{ threshold_udp_pps }}
+threshold_icmp_pps = {{ threshold_icmp_pps }}
+
+ban_for_tcp_bandwidth = off
+ban_for_udp_bandwidth = off
+ban_for_icmp_bandwidth = off
+
+ban_for_tcp_pps = {{ ban_for_tcp_pps }}
+ban_for_udp_pps = {{ ban_for_udp_pps }}
+ban_for_icmp_pps = {{ ban_for_icmp_pps }}
+
+###
+### Traffic capture methods
+###
+
+# PF_RING traffic capture, fast enough but the wirespeed version needs a paid license
+mirror = off
+
+# Port mirroring sample rate
+pfring_sampling_ratio = 1
+
+# Netmap traffic capture (very fast but needs patched drivers)
+mirror_netmap = off
+
+# AF_PACKET capture engine
+# Please use it only with modern Linux kernels (3.6 and more)
+# And please install birq for irq ditribution over cores
+mirror_afpacket = off
+
+# You can use this option to multiply all incoming traffc by this value
+# It may be useful for sampled mirror ports
+mirror_af_packet_custom_sampling_rate = 1
+
+# AF_PACKET fanout mode mode, http://man7.org/linux/man-pages/man7/packet.7.html
+# Available modes: cpu, lb, hash, random, rollover, queue_mapping
+mirror_af_packet_fanout_mode = cpu
+
+# This option should be enabled if you are using Juniper with mirroring of the first X bytesof packet: maximum-packet-length 110;
+af_packet_read_packet_length_from_ip_header = off
+
+# Port mirroring sampling ratio
+netmap_sampling_ratio = 1
+
+# This option should be enabled if you are using Juniper with mirroring of the first X bytesof packet: maximum-packet-length 110;
+netmap_read_packet_length_from_ip_header = off
+
+# Pcap mode, very slow and thus not suitable for production
+pcap = off
+# Netflow capture method with v5, v9 and IPFIX support
+netflow = {{ netflow_on }}
+# sFLOW capture suitable for switches
+sflow = off
+
+# PF_RING configuration
+# If you have a license for PF_RING ZC, enable this mode and it might achieve wire speed for10GE
+enable_pf_ring_zc_mode = off
+
+# Configuration for netmap, mirror, pcap modes
+# For pcap and PF_RING we could specify "any"
+# For netmap and PF_RING we could specify multiple interfaces separated by comma
+interfaces = eth3,eth4
+
+# We use average values for traffic speed to certain IP and we calculate average over this time slice
+average_calculation_time = 5
+
+# We use average values for traffic speed for subnet and we calculate average over this timeslice
+average_calculation_time_for_subnets = 5
+
+# Delay between traffic recalculation attempts
+speed_calculation_delay = 1
+
+# Netflow configuration
+
+# it's possible to specify multiple ports here, using commas as delimiter
+netflow_port = {{ netflow_port }}
+netflow_host = 0.0.0.0
+
+# To bind to all interfaces for all protocols:       not possible yet
+# To bind to all interfaces for a specific protocol: ::  or 0.0.0.0
+# To bind to localhost for a specific protocol:      ::1 or 127.0.0.1
+
+# Netflow v9 and IPFIX agents use different and very complex approaches for notifying about sample ratio
+# Here you could specify a sampling ratio for all this agents
+# For NetFLOW v5 we extract sampling ratio from packets directely and this option not used
+netflow_sampling_ratio = 1
+
+# sFlow configuration
+
+# It's possible to specify multiple ports here, using commas as delimiter
+sflow_port = 6343
+# sflow_port = 6343,6344
+sflow_host = 0.0.0.0
+
+# Some vendors may lie about full packet length in sFlow packet. To avoid this issue we can switch to using IP packet length from parsed header
+sflow_read_packet_length_from_ip_header = off
+
+
+###
+### Actions when attack detected
+###
+
+# This script executed for ban, unban and attack detail collection
+notify_script_path = /usr/local/bin/notify_about_attack.sh
+
+# pass attack details to notify_script via stdin
+# Pass details only in case of "ban" call
+# No details will be passed for "unban" call
+notify_script_pass_details = on
+
+# collect a full dump of the attack with full payload in pcap compatible format
+collect_attack_pcap_dumps = on
+
+# Execute Deep Packet Inspection on captured PCAP packets
+process_pcap_attack_dumps_with_dpi = on
+
+# Save attack details to Redis
+redis_enabled = off
+
+# Redis configuration
+redis_port = 6379
+redis_host = 127.0.0.1
+
+# specify a custom prefix here
+redis_prefix = mydc1
+
+# We could store attack information to MongoDB
+mongodb_enabled = off
+mongodb_host = localhost
+mongodb_port = 27017
+mongodb_database_name = fastnetmon
+
+# announce blocked IPs with BGP protocol with ExaBGP
+exabgp = off
+exabgp_command_pipe = /var/run/exabgp.cmd
+exabgp_community = 65001:666
+
+# specify multiple communities with this syntax:
+# exabgp_community = [65001:666 65001:777]
+
+# specify different communities for host and subnet announces
+# exabgp_community_subnet = 65001:667
+# exabgp_community_host = 65001:668
+
+exabgp_next_hop = 10.0.3.114
+
+# In complex cases you could have both options enabled and announce host and subnet simultaneously
+
+# Announce /32 host itself with BGP
+exabgp_announce_host = on
+
+# Announce origin subnet of IP address instead IP itself
+exabgp_announce_whole_subnet = off
+
+# Announce Flow Spec rules when we could detect certain attack type
+# Please we aware! Flow Spec announce triggered when we collect some details about attack,
+# i.e. when we call attack_details script
+# Please disable exabgp_announce_host and exabgp_announce_whole_subnet if you want to use this feature
+# Please use ExaBGP v4 only (Git version), for more details: https://github.com/pavel-odintsov/fastnetmon/blob/master/docs/BGP_FLOW_SPEC.md
+exabgp_flow_spec_announces = off
+
+# GoBGP intergation
+gobgp = on
+
+# Configuration for IPv4 announces
+gobgp_next_hop = 0.0.0.0
+gobgp_announce_host = on
+gobgp_announce_whole_subnet = off
+
+gobgp_community_host = 65001:666
+gobgp_community_subnet = 65001:777
+
+# Configuration for IPv6 announces
+gobgp_next_hop_ipv6 = 100::1
+gobgp_announce_host_ipv6 = off
+gobgp_announce_whole_subnet_ipv6 = off
+
+gobgp_community_host_ipv6 = 65001:666
+gobgp_community_subnet_ipv6 = 65001:777
+
+# Graphite monitoring
+# InfluxDB is also supported, please check our reference:
+# https://github.com/pavel-odintsov/fastnetmon/blob/master/docs/INFLUXDB_INTEGRATION.md
+graphite = off
+# Please use only IP because domain names are not allowed here
+graphite_host = 127.0.0.1
+graphite_port = 2003
+
+# Default namespace for Graphite data
+graphite_prefix = fastnetmon
+
+# Before using InfluxDB you need to create database using influx tool:
+# create database fastnetmon
+
+# InfluxDB
+influxdb = off
+influxdb_host = 127.0.0.1
+influxdb_port = 8086
+influxdb_database = fastnetmon
+
+# InfluxDB auth
+influxdb_auth = off
+influxdb_user = fastnetmon
+influxdb_password = secure
+
+# Add local IP addresses and aliases to monitoring list
+# Works only for Linux
+monitor_local_ip_addresses = on
+
+# Add IP addresses for OpenVZ / Virtuozzo VEs to network monitoring list
+monitor_openvz_vps_ip_addresses = off
+
+# Create group of hosts with non-standard thresholds
+# You should create this group before (in configuration file) specifying any limits
+# hostgroup = my_hosts:10.10.10.221/32,10.10.10.222/32
+
+# Configure this group
+my_hosts_enable_ban = off
+
+my_hosts_ban_for_pps = off
+my_hosts_ban_for_bandwidth = off
+my_hosts_ban_for_flows = off
+
+my_hosts_threshold_pps = 20000
+my_hosts_threshold_mbps = 1000
+my_hosts_threshold_flows = 3500
+
+# Path to pid file for checking "if another copy of tool is running", it's useful when you run multiple instances of tool
+pid_path = /var/run/fastnetmon.pid
+
+# Path to file where we store IPv4 traffic information for fastnetmon_client
+cli_stats_file_path = /tmp/fastnetmon.dat
+
+# Path to file where we store IPv6 traffic information for fastnetmon_client
+cli_stats_ipv6_file_path = /tmp/fastnetmon_ipv6.dat
+
+# Enable gRPC api (required for fastnetmon_api_client tool)
+enable_api = on
+
+###
+### Client configuration
+###
+
+# Field used for sorting in client, valid values are: packets, bytes or flows
+sort_parameter = packets
+# How much IPs will be listed for incoming and outgoing channel eaters
+max_ips_in_list = 7

roles/fastnetmon/vars/main.yml

@@ -0,0 +1 @@
+---

roles/ndpi/README.md

@@ -0,0 +1,9 @@
+# ansible-ndpi
+this role builds nDPI from source on a fedora machine
+
+## License
+GPLv3
+
+## Author
+wanderer@git.dotya.ml
+

roles/ndpi/defaults/main.yml

@@ -0,0 +1,3 @@
+---
+ndpi_compat_version: 1.7
+ndpi_clone_dir: /tmp/ndpi

roles/ndpi/tasks/main.yml

@@ -0,0 +1,27 @@
+---
+- name: check if nDPI dir exists
+  stat:
+    path: "{{ndpi_clone_dir}}"
+  register: dir_present
+
+- name: get nDPI sources
+  shell:
+    cmd: git clone https://github.com/ntop/nDPI.git {{ndpi_clone_dir}}
+  when: dir_present.stat.exists == false
+
+- name: build and install nDPI
+  shell:
+    cmd:
+      cd {{ndpi_clone_dir}};
+      git checkout {{ndpi_compat_version}};
+      ./autogen.sh &&
+      ./configure &&
+      make &&
+      make install &&
+      make clean &&
+      git switch - ;
+      ./autogen.sh &&
+      ./configure &&
+      make &&
+      make install
+    chdir: "{{ndpi_clone_dir}}"

roles/waitpls/README.md

@@ -0,0 +1,9 @@
+# ansible-waitpls
+this role is used to wait until conditions for running are met
+
+## License
+GPLv3
+
+## Author
+wanderer@git.dotya.ml
+

roles/waitpls/defaults/main.yml

@@ -0,0 +1 @@
+---

roles/waitpls/tasks/main.yml

@@ -0,0 +1,8 @@
+---
+- name: Wait until the file /tmp/gopls is present before continuing
+  delay: 10
+  wait_for:
+    path: /.plsgo
+    timeout: 1200
+  become: false
+

roles/waitpls/vars/main.yml

@@ -0,0 +1 @@
+---