e71ecc862e
* LED Strip mount * Update README * Add additional mods and add naming consistency 6mm Glass lock mod C920 Webcam mount Fix extension of readme so it renders correctly. Edit readme with assembly for webcam |
||
|---|---|---|
| .. | ||
| 6mm Glass | ||
| _LED_Mount_A.stl | ||
| _LED_Mount_B.stl | ||
| _LED_mount.step | ||
| C920_Top_Front_Mount.step | ||
| C920_Top_Front_Mount.stl | ||
| LED Mount A.stl | ||
| LED Mount B.stl | ||
| LED mount.step | ||
| README | ||
| README.MD | ||
_LED_Mount_A & _LED_Mount_B
This is a simple LED light bar mount for this 12V LED Strip light: https://www.banggood.com/30CM-8W-SMD5630-Waterproof-U-Shape-Dual-Row-42LEDs-Rigid-Strip-Hard-Bar-Light-DC12V-p-1255036.html
You will need 1 A & 1 B mount for each strip you intend to install, and I positioned them just under my top glass (or plexi). Beware, running these at 100% duty cycle will get very hot (~80C), and if you have plastic panels it may warp, so you will want to run them with PWM, which is fine since they are very very bright.
I used m3x12 socket head screws to fasten them.
C920_Top_Front_Mount
This is a mount for a Logitech C920 webcam for the front top extrusion on the Voron 2. On my 350 the field of view looks like this: 
I used to M3x10 SHCS to attach to my extrusion with a couple t-nuts.
This is a video of the Disassembly which you will need to perform in order to use this bracket. Disassemble until you can get the two metal swivel joints undone, slide into the two holes on the mount, then reassemble.