948 B
einsy + ramps combo
Instead of 2 ramps I use an Einsy Rambo clone by Fystec and a ramps. The mount is designed so the Einsy can be mounted both above (like the ramps half) or below the mount(like the arduino half). The einsy is a little wider so you might not fit on a 200 spec build because of the PSU. Using 24V with the einsy is highly recommended.
I added my Custom Klipper config as well, but be careful with the screen config, you will most likely need to change it as I'm not using a standard display. Caution! I use LV8729 drivers for my Z axis, they have inverted enable (EN) pins, you have to reomve the "!" from if you are using different drivers like A4988, DRVs or TMCs. I added control via the display menu for my custom LED lighting as well. You will need to rename the config to "config.cfg"