History

Maks Zolin e4ecfa2c23 Revert " Adding missing motor covers, cleanup (#183 )" This reverts commit 24c323d0988ad0e75a9b7b03d6dd1cf20c111311.		2018-12-28 23:14:43 -08:00
..
einsy+ramps_printer.cfg	Revert " Adding missing motor covers, cleanup (#183 )"	2018-12-28 23:14:43 -08:00
einsyramps_mount.stl	Revert " Adding missing motor covers, cleanup (#183 )"	2018-12-28 23:14:43 -08:00
Readme.md	Revert " Adding missing motor covers, cleanup (#183 )"	2018-12-28 23:14:43 -08:00

Readme.md

einsy + ramps combo

Instead of 2 ramps I use an Einsy Rambo clone by Fystec and a ramps. The mount is designed so the Einsy can be mounted both above (like the ramps half) or below the mount(like the arduino half). The einsy is a little wider so you might not fit on a 200 spec build because of the PSU. Using 24V with the einsy is highly recommended.

I added my Custom Klipper config as well, but be careful with the screen config, you will most likely need to change it as I'm not using a standard display. Caution! I use LV8729 drivers for my Z axis, they have inverted enable (EN) pins, you have to reomve the "!" from if you are using different drivers like A4988, DRVs or TMCs. I added control via the display menu for my custom LED lighting as well. You will need to rename the config to "config.cfg"