Contribution-focused fork of github:VoronDesign/Voron-2

Go to file

mmmboost 24790b1e43 Updated VORON2_stock_250_printer.cfg ~Updated stock config file to include new sections and parameters from Klipper changes. ~Removed an M104 S0 line from PRINT_START which caused errors on some slicers. ~Lowered initial accel and velocity values to encourage users to do their own testing and tweaking to their specific machine. ~Added some notes on several variables to help alleviate confusion. ~This config was uses as a baseline for harmonizing and standardizing stock config files for 250/300/250 machines.		2019-06-27 08:47:13 -06:00
Firmware	Updated VORON2_stock_250_printer.cfg	2019-06-27 08:47:13 -06:00
Mods	Add Duet/Duex mount with fan support (#9 )	2019-06-23 06:58:22 -05:00
PCB/XY Endstop	Adding X/Y Hall board back in	2019-05-16 18:17:29 -05:00
Slicer_Profiles	Create KISSlicer_Voron.zip	2019-05-30 07:54:01 -04:00
STLs	add lightbar mounts, create misc folder	2019-06-03 14:13:53 -04:00
.gitignore	Adding BeltChain for V2	2017-12-07 14:17:40 -08:00
LICENSE.md	Updated license in MD format, also updated to v3	2016-05-03 13:13:31 -07:00
README.md	update readme for 2.1.1 release	2019-04-08 19:46:16 -04:00

README.md

Voron 2.1.1

The second official release of the Voron 2.1.1 3d printer. You can find the BOM in the configurator located at the Voron Design website. The recommended sizes for this printer are 250mm^3, 300mm^3, and 350mm^3. Anything outside those is not supported!