| x_carriage_frame_right_remodeled |
Parametrically driven remodel of the right toolhead without the wire tray. The through-screws are modeled like the original stl, but they seem pretty tight from my printer. YMMV, you might need a tap or just start working out more. |
| x_carriage_dragchain_anchorpoint |
You screw your drag chain's floppy end to this side. |
| x_carriage_wire_cover |
Cosmetic wire wrangler interfacing the drag chain to the X carriage. Mounts with a short M3 screw. |
| xy_drag_chain_bridge |
You screw your drag chain's floppy end to this side. Wires go through it and up into the Y chain. |
| a_corner_wire_guide |
Covers your wires around the A corner. Keeps them from chafing against the rail and frame, while keeping them tidily away from the belt. Also, you screw your drag chain's floppy end to this side. |
| lower_drag_chain_mount |
Mounts to the rear lower frame. You'll need to cut an L shaped slot into your bottom panel. Also a great spot to run your bed and heater wires down through. Move this on the rail until you get a little tension on your Z chain. That'll keep it tight and it will look awesome. |
