This is a modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears. https://github.com/mzbotreprap/VORON/tree/master/STLs/VORON2/VORON%20Mobius You will need to substitue the 45mm long 5mm diameter shaft for a 60mm long shaft 2x M3x20 1x M3x12 2x M3 Nuts 2x M3 Washers The rest of the hardware is the same with the obvious replacement of the MK8 and bearing with Bondtech drivegears. BMGobius Specific Parts to Print: BMGobius Body A BMGobius Body B BMGobius Idler A BMGobius Idler B Stock Mobius Parts: tensioner_dial mobius_mount jog_dial bsp_adapter Remember to put a dab of butter or your choice of lube on the gear section of the drive gears and the roller bearings.