kreyren/Vorrenrey
1
0
Fork 0
Code Issues 1 Pull Requests Releases Activity
674 Commits 2 Branches 0 Tags 1.5 GiB
49cd18f4be
Commit Graph

244 Commits

Author SHA1 Message Date
John Jardine
59f8f7be7d
replace x carriage 2.1 mount with one that works, add chamfer to bottom of blanking plate (#66) 2019-11-08 19:47:32 -05:00
Annex_Engineering
e1e4a3cca3 Repair STL issues with XY Bridge and Idler Frame, side skirts were 1mm short (#61) 
* fix inverted mirror idler frame

* fix unprintable overhang - v21 xy bridge

* fix unprintable overhang - v2.2 xy bridge

* side skirts were 1mm short compared to front
 2019-11-06 20:03:13 +01:00
volcom8190
d7cceeda95 Adjust Z Tensioner Travel 
it was possible to overextend the Z belt tensioners, such that they would actually rotate out, this corrects that issue
 2019-11-04 15:56:51 -05:00
volcom8190
f5b2595a74 add zipchain backwards support for 2.1, update bed marking template to match print 
add zipchain backwards support for 2.1, update bed marking template to match print
 2019-11-03 15:03:44 -05:00
volcom8190
a72f205e6a Many Small Updates and QOL items 
Update Bottom DXF, add 80mm Bottom and Back Fan Mounts (back requires cutting of charcoal filter), Pi Bracket for Pi with Heatsink Case,  Short Nozzle Scrubber Holder, Skirts that take less material, re-add cable anchors for gantry

Co-Authored-By: Voron <vorondesign@users.noreply.github.com>
Co-Authored-By: FEBngineering <volcom8190@users.noreply.github.com>
 2019-11-01 16:13:57 -04:00
volcom8190
4e0f080e63 move unsupported controllers 2019-10-07 18:36:31 -04:00
volcom8190
4959d8f21e fix case issues with git 2019-10-07 09:51:59 -04:00
volcom8190
4d41f46e1d fix case issues with git 2019-10-07 09:50:19 -04:00
volcom8190
e2f6c5e66c move 5mm extrusion parts to own folder 
people were confused, ending that
 2019-10-04 16:40:58 -04:00
volcom8190
d21104bdaf change quantities on panel clips 
all machines use 4 or 6mm thick coroplast, therefore you need min 4mm back panel clips. thus the quantity of 38 clips. Removed confusing extra key
 2019-09-28 17:52:04 -04:00
volcom8190
e437abd0e5 bsp adapter is mosquito only 
bsp adapter is mosquito only
 2019-09-25 05:53:25 -04:00
volcom8190
b182b8f6b6 append x1 to file 2019-09-24 13:14:53 -04:00
volcom8190
57f6728577 move hd carriages to noted folder 
move hd carriages to noted folder
 2019-09-24 09:59:22 -04:00
volcom8190
73d63ebc5e release 2.2 to world 
release 2.2 to world
 2019-09-23 20:09:47 -04:00
volcom8190
8158f5d52b clean in prep for 2.2 release 
clean in prep for 2.2 release
 2019-09-23 13:17:39 -04:00
volcom8190
624963cbae 2.1.3 - add microswitch endstop, remove FSR, add nozzle brush holder from "2dot2" 
this release adds the 2dot2 microswitch endstop and nozzle brush to 2.1.3, this should be the first part you print before 2.2 release.
 2019-09-19 19:08:40 -04:00
volcom8190
1914d60d7a [accent]_ to [a]_ 
[accent]_ to [a]_
 2019-08-26 20:55:31 -04:00
volcom8190
2683d164da accent_ to [accent]_ 
accent_ to [accent]_
 2019-08-26 20:15:17 -04:00
volcom8190
e59c09097e reupload STLs 
reupload STLs
 2019-08-21 19:43:39 -04:00
volcom8190
c8202b46b2 remove stls 2019-08-21 19:42:29 -04:00
Maglin
7843eaabff Added Accent lables to accent files 2019-08-19 21:01:39 -05:00
Maglin
c47ee3e996 Fixed Voron Design Cube 2019-08-17 13:02:10 -05:00
volcom8190
fad335ea4b add bed drilling template 
draw line across center of bed, mark holes, drill
 2019-08-13 21:10:18 -04:00
volcom8190
0467473ac7 Create rs_35_##_mounting_frame.STL 2019-08-04 17:40:35 -04:00
Maglin
d04b750d7f Whitespace and file encoding cleanup 2019-07-28 09:04:54 -05:00
Maglin
74b524c867 whitespace removal test 2019-07-28 08:55:50 -05:00
Maglin
d9acf56159 Updated Voron Cura for V4.1, Added Voron Design Cube, Removed Depracted items 2019-07-28 08:39:18 -05:00
volcom8190
16ef2514ec update v6 holder to 2.2 
forgot to do this
 2019-07-19 21:20:53 -04:00
volcom8190
aa652a4de2 Update dual_ramps_frame.stl 
make part easier to print with more consistent wall thicknesses and remove single extrusion lines around mounting holes
 2019-07-19 10:19:46 -04:00
volcom8190
a51fd422de reinforce duet and skr mounting bracket 
reinforce duet and skr mounting bracket
 2019-07-17 09:30:17 -04:00
volcom8190
852daa5a2c add lightbar mounts, create misc folder 
add lightbar mounts, create misc folder
 2019-06-03 14:13:53 -04:00
volcom8190
d1bbd4735b Create mosquito_sock_mold_assembly_drawing.pdf 2019-05-26 19:32:27 -04:00
volcom8190
633b9655bb update duet and skr mounts, add skr mini 
update duet and skr mounts, add skr mini
 2019-05-26 18:02:48 -04:00
volcom8190
103c52f0db add mosquito hotend sock to toolhead folder 
add mosquito hotend sock to toolhead folder
 2019-05-26 17:13:55 -04:00
volcom8190
4bb1ec1338 added mzbot cube and 3 test prints 
if you can print these and they thread together/look good with no issues, you can print a voron
 2019-05-23 11:57:05 -04:00
volcom8190
5121635a68 remove nested version folder in STL directory 2019-05-23 07:50:58 -04:00
volcom8190
9cce02d135 update folder name, add more controller brackets 
update folder name, add more controller brackets
 2019-05-18 10:31:17 -04:00
volcom8190
edcde84de3 2.1.2 Push = Mosquito Hotend Support 
Initial Release for Mosquito Support
 2019-05-18 10:13:24 -04:00
volcom8190
05c1a065a1 reorient tape chain attachment on x carriage, add count to 80t for z drive use only 
reorient tape chain attachment on x carriage, add count to 80t for z drive use only
 2019-05-16 16:23:09 -04:00
volcom8190
b570d1a6ac extra clearance to cable cover for 20mm tape chain bridge 
extra clearance to cable cover for 20mm tape chain bridge
 2019-04-13 09:42:17 -04:00
volcom8190
ca20d12619 remove mobius 2 folder 
remove mobius 2 folder
 2019-04-08 19:09:22 -04:00
volcom8190
70fe253421 rename folder 2.1.1 
rename folder to 2.1.1
 2019-04-08 19:09:22 -04:00
volcom8190
4f67e99e63 add remaining 2.1.1 parts 
add part cooling ducts and extended tape chain mounts
 2019-04-08 19:09:22 -04:00
volcom8190
44af4ff344 add 2.1.1 parts 
fix clearances in front idlers, add electronics brackets, add filtered power inlet, add new 80t
 2019-04-08 19:09:22 -04:00
daveidmx
49e7ea9d54 Removing cutting jigs no longer necessary for final V2.1 (#162) 2018-11-12 10:03:31 -06:00
Maks Zolin
4a98f0cf04 Dropping bearing spacers by 0.2mm 2018-11-01 11:09:06 -07:00
Maglin
aa57cf34c7 3rd time's the charm for these 80T STL's 2018-10-17 17:16:54 -05:00
daveidmx
8d6fa6e0d6 Adding 40mm cutting jig for FSR shaft. (#151) 
Used with the Dremel Cutting Jig.
 2018-10-01 10:09:27 -05:00
Maglin
d500634b5d removing Mobius from V2.1 STS 2018-09-26 00:07:51 -05:00
Maks Zolin
86f1d9d184 New PSU brackets to accomodate a change in bed supports rototation 2018-09-22 00:39:55 -07:00
Maks Zolin
b7c12afa65 Fixing interference issues with cable bridge 2018-09-16 22:32:11 -07:00
Maglin
d7f1f10e71 rebasing from Master 2018-09-16 14:28:03 -05:00
Maglin
4803c2213c Replaced 80T with rounder version 2018-09-16 14:20:12 -05:00
Maglin
60c3b648af Replaced 80T with rounder version 2018-09-16 12:36:21 -05:00
Maglin
390bddf69d New STL's for 80T V Lock. Now featureing roundness! 2018-09-16 12:30:31 -05:00
Maks Zolin
d98c7d1dbf
Revising FSR switch body for ease of installation (#147) 2018-09-13 00:08:40 -07:00
Maglin
8c021eec3c Only V2.1 Release Files 2018-09-08 17:47:54 -05:00
Maglin
a7be50cb21 Added Voron 2.1 Release STLs 2018-09-08 16:42:56 -05:00
Maks Zolin
a905a220dd Hello Discord 2018-06-26 13:29:26 -07:00
Maglin
0b3d207d24 Moved V1.55 to Don't Use Folder as it tested none functional 2018-06-05 17:27:12 -05:00
Atila Barta
a2b5338a0b Added 40x40x10 fan cover, and corner parts for Base Compartment (#129) 
* Add files via upload

* Corner parts for Base Compartment

They are in 510mm Frame folder, but suited for any build
 2018-04-20 10:02:22 -07:00
volcom8190
2a32871575 update IR sensor bracket (#118) 
* Add Filtered Mains Inlet

* add alternate PSU Bracket and Duet Brackets

add alternate PSU Bracket and Duet Brackets

* update model orientation

* M3 Hardware instead of M5

* fix corrupted stls

* update ir bracket with vent holes

* add step for 40mm fan with new IR bracket

* add 120mm fan filter and cover
 2018-02-25 00:53:53 -08:00
Maks Zolin
6380524b00 Adding magnet holders for hall-effect XY endstop 2018-02-25 00:50:04 -08:00
Maks Zolin
1aadca1826 Nuking a useless tool :( 2018-02-15 12:47:48 -08:00
Maks Zolin
8588107f82 New endstop brackets, z chain retainer, bed connector solution 2018-02-13 17:52:26 -08:00
Maks Zolin
c396bf025a Fixing orientation 2018-02-11 01:30:15 -08:00
Maks Zolin
9be1c68030 AB Drive rework. Mobius mount and inlet for bowden. Z rail stops. 2018-02-11 01:27:28 -08:00
Maks Zolin
df52a041ce Adding new mounts for Mobius (replaces the "frame_spacer" part) 2018-02-03 01:36:51 -08:00
Maks Zolin
ccaa5a4faf Fixing print orientation 2018-02-03 01:34:19 -08:00
drasrx
79314aab21 Update README.md (#113) 2018-01-31 10:48:57 -08:00
Samori Gorse
69eb7e143d Typo: Stabalizer -> Stabilizer (#110) 
Fixed a typo in STLs/VORON2/Front Idlers/front_idler_stabilizer_x2.stl
Courtesy of @ampex V022
 2018-01-31 10:48:36 -08:00
volcom8190
5971eaa149 Add Filtered Mains Inlet, Duet Brackets and Alternate PSU Brackets for LSU-200-24 or similar (#116) 
* Add Filtered Mains Inlet

* add alternate PSU Bracket and Duet Brackets

add alternate PSU Bracket and Duet Brackets

* update model orientation

* M3 Hardware instead of M5

* fix corrupted stls
 2018-01-31 10:48:16 -08:00
Maks Zolin
9cf60aee6c Making the bracket compatible with V1 spec 6mm M4s 2018-01-27 15:31:52 -08:00
Maks Zolin
6bd5174133 Adding some electronics brackets 2018-01-27 11:43:26 -08:00
Maks Zolin
cc6dd8e8b6 Fixing motor interference 2018-01-19 16:35:25 -08:00
Maks Zolin
93b2ace030 Fixing orientation 2018-01-17 18:04:02 -08:00
Maks Zolin
f5d0653a92 Slight tweak to idler parts, Tension balance gauge 2018-01-17 18:02:01 -08:00
Maks Zolin
63ea28b55a Fixing orientation 2018-01-14 15:52:13 -08:00
Maks Zolin
fd504c1876 New belt attachement system, beefier cover clip 2018-01-14 02:16:35 -08:00
Maks Zolin
f43ab88c6b Fixing orientation 2018-01-14 02:16:13 -08:00
Maks Zolin
42a22dd589 Removing bed support. Not needed 2018-01-14 02:14:42 -08:00
Maks Zolin
60ca4512d9 Fixing 2 year old mistakes, adding mount options for extruder 2018-01-14 00:36:55 -08:00
Maks Zolin
3e89198c23 Fixing 16mm M5 clearance 2018-01-13 11:06:11 -08:00
Maks Zolin
96489ea8af Adding the new dampener bases 2018-01-12 11:12:56 -08:00
Maks Zolin
d6d59ee9bc Nuking old Z part. Adding Z Mobius Drive parts 2018-01-12 02:16:21 -08:00
Maks Zolin
d3323346ad Switching to 30mm m3 screws, adjusted draft angle 2018-01-11 18:20:39 -08:00
Maks Zolin
d4e119d30c Rail install guides 2018-01-11 13:17:18 -08:00
Maks Zolin
29e48776d9 Fixing tolerances on the Z anti-rotation nub 2018-01-11 11:19:46 -08:00
Maks Zolin
b51809a957 Fixing the over-ambitious overhangs 2018-01-09 14:10:15 -08:00
Maks Zolin
7608920850 Slight tweaks to tolerances and orientation 2018-01-09 13:54:15 -08:00
Maks Zolin
48aafd6985 Merge branch 'master' of https://github.com/mzbotreprap/VORON 2018-01-09 11:13:55 -08:00
Maks Zolin
70d2e899c1 v2.4 Mobius (20T drive pulley now) 2018-01-09 11:13:18 -08:00
Samori Gorse
71901bbbc5 tenstioner -> tensioner (#109) 
Small typo
 2018-01-05 16:32:08 -08:00
Maks Zolin
ae7f143038 Removing a trailing space 2018-01-05 16:27:24 -08:00
Maks Zolin
410001bb5a Front idler mounts and the panel rests/handles 2018-01-05 15:07:59 -08:00
Maks Zolin
cb443ee4e2 Reworking cooling fan mount interface 2018-01-04 11:47:56 -08:00
Maks Zolin
4260ad7397 Let's give that LCD button a bit of room 2018-01-04 01:25:32 -08:00
Maks Zolin
865ff77844 Fixing block print orientation 2018-01-04 01:20:10 -08:00
Maks Zolin
a7b67616b0 partz 2018-01-04 01:06:46 -08:00
Maks Zolin
bbee305f46 Adding accent parts list 2018-01-04 01:04:53 -08:00