* MKS Gen L v1.0 brackets
Both orientations. Original hole spacing 102x76mm, scaled to 100.25% to deal with ABS+ shrink (tested on version with long side to the extrusion.)
* Move STLs into their own directory.
* MKS GenL v1.0 brackets, STEP files.
* M3 cable tie clip
Add small M3 cable tie clip, designed to fit onto the bottom extrusions under the coroplast.
* Mains plug panel with RJ45
Two new versions of the mains plug panel, one with the ethernet socket on the left, and one on the right (the 'alternative')
* Create README.md
* Create m4_small_cable_tie_mount.stl
Add M4 variant
* Rename f3d file
* Create README.md
* Add STEP files
* Add 5mm slot cover clips
* Add files via upload
* Delete Fan_cover_21.STL
* Create Readme
* Add files via upload
* Delete Readme
* Delete Fan_cover_4holes.STL
* Delete Fan_cover_2holes.STL
* Create empty
* New covers for V2.1
2 holes for hotend fans and 4 holes for side skirt fans...
* Delete empty
* Delete Fan_cover_2holes.STL
* Delete Fan_cover_4holes.STL
* Create Fan_covers
* New Fan Covers for V2.1
2 holes for hotend fan and 4 holes for side skirt fans
* Uploaded STEP files
* Allows mounting of an LED lightbar inside of the enclosure
* Allows mounting of a RJ45 coupler to provide strain relief/etc
for people using the Duet2 Ethernet
* Adds an extra bracket for the power supply for additional support
* Add Filtered Mains Inlet
* add alternate PSU Bracket and Duet Brackets
add alternate PSU Bracket and Duet Brackets
* update model orientation
* M3 Hardware instead of M5
* fix corrupted stls
* update ir bracket with vent holes
* add step for 40mm fan with new IR bracket
* add 120mm fan filter and cover
* add paneldue7 ts, and reorganize folder
* Add Filtered Mains Inlet
* add alternate PSU Bracket and Duet Brackets
add alternate PSU Bracket and Duet Brackets
* update model orientation
* M3 Hardware instead of M5
* fix corrupted stls
* update ir bracket with vent holes
* add step for 40mm fan with new IR bracket
* add 120mm fan filter and cover