kreyren/Vorrenrey
1
0
Fork 0
Code Issues 1 Pull Requests Releases Activity

Some additional small changes

Browse Source
This commit is contained in:
Bierfahrer 2017-04-24 12:39:33 +02:00 committed by GitHub
parent dd1733eb7d
commit f85720a016
1 changed files with 6 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
Firmware/Smoothieware/MKS SBase/config.txt
View File

@ -7,7 +7,7 @@
# Serial communications configuration ( baud rate default to 9600 if undefined )
uart0.baud_rate 115200 # Baud rate for the default hardware serial port
second_usb_serial_enable false # This enables a second usb serial port (to have both pronterface and a terminal connected)
second_usb_serial_enable true # This enables a second usb serial port (to have both pronterface and a terminal connected)
#msd_disable false # disable the MSD (USB SDCARD) when set to true
# Robot module configurations : general handling of movement G-codes and slicing into moves
@ -38,21 +38,21 @@ base_stepping_frequency 100000 # Base frequency f
alpha_step_pin 2.0 # Pin for alpha stepper step signal
alpha_dir_pin 0.5 # Pin for alpha stepper direction
alpha_en_pin 0.4 # Pin for alpha enable pin 0.10
alpha_current 1.0 # X stepper motor current
alpha_current 1.5 # X stepper motor current
x_axis_max_speed 30000 # mm/min
alpha_max_rate 30000.0 # mm/min actuator max speed
beta_step_pin 2.1 # Pin for beta stepper step signal
beta_dir_pin 0.11 # Pin for beta stepper direction
beta_en_pin 0.10 # Pin for beta enable
beta_current 1.0 # Y stepper motor current
beta_current 1.5 # Y stepper motor current
y_axis_max_speed 30000 # mm/min
beta_max_rate 30000.0 # mm/min actuator max speed
gamma_step_pin 2.2 # Pin for gamma stepper step signal
gamma_dir_pin 0.20! # Pin for gamma stepper direction
gamma_en_pin 0.19 # Pin for gamma enable
gamma_current 1.0 # Z stepper motor current
gamma_current 1.5 # Z stepper motor current
z_axis_max_speed 300 # mm/min
gamma_max_rate 300.0 # mm/min actuator max speed
@ -90,9 +90,8 @@ extruder.hotend2.y_offset 18.0 # y offset from or
extruder.hotend.z_offset 0 # z offset from origin in mm
extruder.hotend2.z_offset 0 # z offset from origin in mm
delta_current 1.0 # Extruder stepper motor current
epsilon_current 1.0 # Second extruder stepper motor current
delta_current 1.5 # Extruder stepper motor current
epsilon_current 1.5 # Second extruder stepper motor current
# laser module configuration
laser_module_enable false # Whether to activate the laser module at all. All configuration is ignored if false.