kreyren/Vorrenrey
1
0
Fork 0
Code Issues 1 Pull Requests Releases Activity

Update cfg (#55)

Browse Source 
* Update printer.cfg

* Update printer.cfg

* Update printer.cfg

* Update printer.cfg
This commit is contained in:
chron-kh 2019-11-03 10:54:25 -05:00 committed by John Jardine
parent e32c1164f4
commit ec05333a05
1 changed files with 64 additions and 54 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

116
mods/Chron/SKR 1.3 Config/printer.cfg
View File

@ -1,7 +1,7 @@
# CHRONS VORON2 300mm SKR 1.3 TMC2208 UART config
# *** THINGS TO CHANGE/CHECK: ***
# Arduino paths [mcu] section
# MCU paths [mcu] section
# Thermistor types [extruder] and [heater_bed] sections - See 'sensor types' list at end of file
# FSR switch (z endstop) location [homing_override] section
# FSR switch (z endstop) offset for Z0 [stepper_z] section
@ -110,16 +110,15 @@ endstop_pin: P1.29
position_min: 0
position_endstop: 305
position_max: 305
homing_speed: 50
homing_speed: 100
homing_retract_dist: 5
homing_positive_dir: true
[tmc2208 stepper_x]
uart_pin: P1.17
microsteps: 16
interpolate: True
run_current: 0.8
hold_current: 0.5
run_current: 1.0
hold_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 250
@ -133,16 +132,15 @@ endstop_pin: P1.27
position_min: 0
position_endstop: 305
position_max: 305
homing_speed: 50
homing_speed: 100
homing_retract_dist: 5
homing_positive_dir: true
[tmc2208 stepper_y]
uart_pin: P1.15
microsteps: 16
interpolate: True
run_current: 0.8
hold_current: 0.5
run_current: 1.0
hold_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 250
@ -157,11 +155,11 @@ step_pin: z:P2.2
dir_pin: !z:P2.6
enable_pin: !z:P2.1
step_distance: 0.00250
endstop_pin: !z:P1.25
endstop_pin: z:P1.25
# Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
# (+) value = endstop above Z0, (-) value = endstop below
position_endstop: -0.5
position_max: 240
position_max: 280
position_min: -5
homing_speed: 15.0
second_homing_speed: 3.0
@ -170,8 +168,8 @@ homing_retract_dist: 3.0
[tmc2208 stepper_z]
uart_pin: z:P1.17
microsteps: 16
interpolate: True
run_current: 0.90
interpolate: False
run_current: 1.0
hold_current: 0.80
sense_resistor: 0.110
stealthchop_threshold: 50
@ -188,8 +186,8 @@ step_distance: 0.00250
[tmc2208 stepper_z1]
uart_pin: z:P1.15
microsteps: 16
interpolate: True
run_current: 0.80
interpolate: False
run_current: 1.0
hold_current: 0.80
sense_resistor: 0.110
stealthchop_threshold: 50
@ -205,8 +203,8 @@ step_distance: 0.00250
[tmc2208 stepper_z2]
uart_pin: z:P1.10
microsteps: 16
interpolate: True
run_current: 0.90
interpolate: False
run_current: 1.0
hold_current: 0.80
sense_resistor: 0.110
stealthchop_threshold: 50
@ -222,8 +220,8 @@ step_distance: 0.00250
[tmc2208 stepper_z3]
uart_pin: z:P1.8
microsteps: 16
interpolate: True
run_current: 0.90
interpolate: False
run_current: 1.0
hold_current: 0.80
sense_resistor: 0.110
stealthchop_threshold: 50
@ -246,7 +244,7 @@ sensor_type: NTC 100K beta 3950
sensor_pin: P0.24
smooth_time: 3.0
min_temp: 10
max_temp: 270
max_temp: 300
max_power: 1.0
min_extrude_temp: 170
max_extrude_only_distance: 1150
@ -254,7 +252,7 @@ max_extrude_cross_section: 9999
# PA can be disabled by declaring a 0.0 value
pressure_advance: 0.0
# time seconds to look ahead for PA moves default is 0.010 or 10ms
pressure_advance_lookahead_time: 0.010
#pressure_advance_lookahead_time: 0.010
control = pid
pid_kp = 26.213
pid_ki = 1.304
@ -264,7 +262,6 @@ pid_kd = 131.721
[tmc2208 extruder]
uart_pin: P1.10
microsteps: 16
interpolate: True
run_current: 1.0
hold_current: 1.0
sense_resistor: 0.110
@ -286,7 +283,7 @@ x_offset: 0
y_offset: 25.0
z_offset: 0
# Speed (in mm/s) of the Z axis when probing. The default is 5mm/s.
speed: 2.0
speed: 10.0
samples: 4
# How far to retract (in mm) from the probe point for multi-probe samples
sample_retract_dist: 3.0
@ -316,21 +313,20 @@ kick_start_time: 0.5
cycle_time: 0.001
[heater_fan hotend_fan]
# Hotend fan MCU Z
pin: P2.7
#max_power: 0.8
#shutdown_speed: 0.0
max_power: 1.0
shutdown_speed: 0.0
kick_start_time: 0.5
heater: extruder
heater_temp: 50.0
#fan_speed: 1.0
#[heater_fan controller_fan]
# Controller fan HE0 on MCU Z
#pin: z:2.7
#kick_start_time: 0.500
#heater: heater_bed
#heater_temp: 45.0
# Controller fan
pin: z:P2.7
kick_start_time: 0.500
heater: heater_bed
heater_temp: 45.0
[heater_fan exhaust_fan]
pin: z:P2.4
@ -349,7 +345,7 @@ sensor_pin: z:P0.25
smooth_time: 3.0
max_power: 1.0
min_temp: 0
max_temp: 110
max_temp: 120
control: pid
pid_kp: 58.437
pid_ki: 2.347
@ -358,9 +354,7 @@ pid_kd: 363.769
[idle_timeout]
timeout: 1800
[verify_heater heater_bed]
hysteresis: 0.5
check_gain_time: 120
[homing_override]
axes: z
@ -370,7 +364,7 @@ gcode:
G0 Z5 F600
G28 X Y
# XY Location of the FSR Switch
G0 X99.7 Y305 F3600
G0 X202 Y305 F3600
G28 Z
G0 Z10 F1800
G0 X150 Y150 Z30 F3600
@ -390,7 +384,7 @@ points:
240,60
# The speed (in mm/s) of non-probing moves during the calibration.
# The default is 50.
speed: 50
speed: 100
# The height (in mm) that the head should be commanded to move to
# just prior to starting a probe operation. The default is 5
horizontal_move_z: 10
@ -410,34 +404,51 @@ speed: 200
horizontal_move_z: 10
min_point: 20,20
max_point: 280,280
probe_count: 10,10
probe_count: 5,5
fade_start: 0.5
fade_end: 25.0
split_delta_z: .025
move_check_distance: 5.0
split_delta_z: .01
move_check_distance: 3
mesh_pps: 0,0
algorithm: bicubic
relative_reference_index: 12
[display]
#[display]
# RepRapDiscount 128x64 Full Graphic Smart Controller
lcd_type: st7920
cs_pin: z:P1.19
sclk_pin: z:P1.20
sid_pin: z:P1.18
#lcd_type: st7920
#cs_pin: z:P1.19
#sclk_pin: z:P1.20
#sid_pin: z:P1.18
# LCD connector on mcu_z
menu_timeout: 40
#menu_timeout: 40
# Timeout for menu. Being inactive this amount of seconds will exit the menu
# Default is 0 seconds (disabled)
encoder_pins: ^z:P3.26, ^z:P3.25
click_pin: ^!z:P0.28
#encoder_pins: ^z:P3.26, ^z:P3.25
#click_pin: ^!z:P0.28
#kill_pin: ^!z:
# "mini12864 LCD Display
#lcd_type: uc1701
#cs_pin: P1.18
#a0_pin: P1.19
#encoder_pins: ^P3.26,^P3.25
#click_pin: ^!P0.28
#contrast: 63
#[neopixel my_neopixel]
#pin: P1.21
#chain_count: 3
#initial_RED: 0.1
#initial_GREEN: 0.5
#initial_BLUE: 0.0
### Macros ###
[gcode_macro G32]
gcode:
BED_MESH_CLEAR
G28
QUAD_GANTRY_LEVEL
G28
@ -446,11 +457,9 @@ gcode:
[gcode_macro PRINT_START]
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
gcode:
M117 Homing... ; display message
G28 ; home all axes
G1 Z20 F3000 ; move nozzle away from bed
M117 Preheat (Print) ; display message
M104 S0 ; turn off hotend while waiting for bed to get to temp)
[gcode_macro PRINT_END]
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
@ -465,7 +474,8 @@ gcode:
G1 Z2 F3000 ; move nozzle up 2mm
G90 ; absolute positioning
G0 X125 Y250 F3600 ; park nozzle at rear
M117 Finished!
BED_MESH_CLEAR
[gcode_macro LOAD_FILAMENT]
gcode:
@ -484,6 +494,7 @@ gcode:
[gcode_macro quad_me]
gcode:
BED_MESH_CLEAR
G28
quad_gantry_level
G28
@ -491,7 +502,6 @@ gcode:
G28
quad_gantry_level
G28
G1 X150 Y150 Z20
# Sensor Types
# "EPCOS 100K B57560G104F"