kreyren/Vorrenrey
1
0
Fork 0
Code Issues 1 Pull Requests Releases Activity

Update Voron2_Spider_Config.cfg

Browse Source 
a few small cleanups to Spider printer.cfg
This commit is contained in:
shiftingtech 2021-09-02 22:17:26 -06:00 committed by GitHub
parent 3f449bf14d
commit d5ca5901f9
Signed by: GitHub
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg
View File

@ -34,7 +34,7 @@ square_corner_velocity: 5.0
[stepper_x] [stepper_x]
## Connected to X-MOT (B Motor) ## Connected to X-MOT (B Motor)
step_pin: PE11 step_pin: PE11
dir_pin: !PE10 dir_pin: PE10
enable_pin: !PE9 enable_pin: !PE9
rotation_distance: 40 rotation_distance: 40
microsteps: 16 microsteps: 16
@ -73,7 +73,7 @@ stealthchop_threshold: 0
[stepper_y] [stepper_y]
## Connected to Y-MOT (A Motor) ## Connected to Y-MOT (A Motor)
step_pin: PD8 step_pin: PD8
dir_pin: !PB12 dir_pin: PB12
enable_pin: !PD9 enable_pin: !PD9
rotation_distance: 40 rotation_distance: 40
microsteps: 16 microsteps: 16
@ -116,7 +116,7 @@ stealthchop_threshold: 0
## Z0 Stepper - Front Left ## Z0 Stepper - Front Left
[stepper_z] [stepper_z]
step_pin: PD14 step_pin: PD14
dir_pin: !PD13 dir_pin: PD13
enable_pin: !PD15 enable_pin: !PD15
rotation_distance: 40 rotation_distance: 40
gear_ratio: 80:16 gear_ratio: 80:16
@ -148,7 +148,6 @@ homing_retract_dist: 3
## Make sure to update below for your relevant driver (2208 or 2209) ## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z] [tmc2209 stepper_z]
uart_pin: PD10 uart_pin: PD10
uart_address: 0
interpolate: True interpolate: True
run_current: 0.8 run_current: 0.8
hold_current: 0.8 hold_current: 0.8
@ -159,7 +158,7 @@ stealthchop_threshold: 0
## Z1 Stepper - Rear Left ## Z1 Stepper - Rear Left
[stepper_z1] [stepper_z1]
step_pin: PE6 step_pin: PE6
dir_pin: PC13 dir_pin: !PC13
enable_pin: !PE5 enable_pin: !PE5
rotation_distance: 40 rotation_distance: 40
gear_ratio: 80:16 gear_ratio: 80:16
@ -178,7 +177,7 @@ stealthchop_threshold: 0
## Z2 Stepper - Rear Right ## Z2 Stepper - Rear Right
[stepper_z2] [stepper_z2]
step_pin: PE2 step_pin: PE2
dir_pin: !PE4 dir_pin: PE4
enable_pin: !PE3 enable_pin: !PE3
rotation_distance: 40 rotation_distance: 40
gear_ratio: 80:16 gear_ratio: 80:16
@ -197,7 +196,7 @@ stealthchop_threshold: 0
## Z3 Stepper - Front Right ## Z3 Stepper - Front Right
[stepper_z3] [stepper_z3]
step_pin: PD12 step_pin: PD12
dir_pin: PC4 dir_pin: !PC4
enable_pin: !PE8 enable_pin: !PE8
rotation_distance: 40 rotation_distance: 40
gear_ratio: 80:16 gear_ratio: 80:16
@ -218,7 +217,7 @@ stealthchop_threshold: 0
## In E0-MOT Position ## In E0-MOT Position
[extruder] [extruder]
step_pin: PD5 step_pin: PD5
dir_pin: !PD6 dir_pin: PD6
enable_pin: !PD4 enable_pin: !PD4
## Update value below when you perform extruder calibration ## Update value below when you perform extruder calibration
@ -502,7 +501,7 @@ gcode:
G0 X125 Y250 F3600 ; park nozzle at rear G0 X125 Y250 F3600 ; park nozzle at rear
BED_MESH_CLEAR BED_MESH_CLEAR
## Thermistor Types ## Common Temperature Sensors
## "EPCOS 100K B57560G104F" ## "EPCOS 100K B57560G104F"
## "ATC Semitec 104GT-2" ## "ATC Semitec 104GT-2"
## "NTC 100K beta 3950" ## "NTC 100K beta 3950"