From c97de1823f7bcff6f0ce2bc0dba12914be1efee6 Mon Sep 17 00:00:00 2001
From: shiftingtech <53156353+shiftingtech@users.noreply.github.com>
Date: Sat, 9 Jan 2021 17:22:08 -0700
Subject: [PATCH] Update Voron2_SKR_14_Config.cfg

Updated Z axis to use gear_ratio
---
 .../SKR_1.4/Voron2_SKR_14_Config.cfg                 | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
index b2535ad..2b2fb87 100644
--- a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
+++ b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
@@ -177,7 +177,8 @@ stealthchop_threshold: 0
 step_pin: z:P2.2
 dir_pin: !z:P2.6
 enable_pin: !z:P2.1
-rotation_distance: 8
+rotation_distance: 40
+gear_ratio: 80:16
 microsteps: 16
 endstop_pin: z:P1.27
 ##  Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
@@ -217,7 +218,8 @@ stealthchop_threshold: 0
 step_pin: z:P0.19
 dir_pin: z:P0.20
 enable_pin: !z:P2.8
-rotation_distance: 8
+rotation_distance: 40
+gear_ratio: 80:16
 microsteps: 16
 
 ##	Make sure to update below for your relevant driver (2208 or 2209)
@@ -235,7 +237,8 @@ stealthchop_threshold: 0
 step_pin: z:P0.22
 dir_pin: !z:P2.11
 enable_pin: !z:P0.21
-rotation_distance: 8
+rotation_distance: 40
+gear_ratio: 80:16
 microsteps: 16
 
 ##	Make sure to update below for your relevant driver (2208 or 2209)
@@ -253,7 +256,8 @@ stealthchop_threshold: 0
 step_pin: z:P2.13
 dir_pin: z:P0.11
 enable_pin: !z:P2.12
-rotation_distance: 8
+rotation_distance: 40
+gear_ratio: 80:16
 microsteps: 16
 
 ##	Make sure to update below for your relevant driver (2208 or 2209)