kreyren/Vorrenrey
1
0
Fork 0
Code Issues 1 Pull Requests Releases Activity

Remove leading spaces from selectable config options that could lead to klipper errors if user is not familiar with config syntax. (#289)

Browse Source
This commit is contained in:
cbc02009 2021-12-30 16:00:03 -05:00 committed by GitHub
parent fd729568d8
commit c02b2bf126
Signed by: GitHub
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
firmware/klipper_configurations/Octopus/Voron2_Octopus_Config.cfg
View File

@ -246,7 +246,7 @@ filament_diameter: 1.75
heater_pin: PA2
## Validate the following thermistor type to make sure it is correct
## See https://www.klipper3d.org/Config_Reference.html#common-thermistors for additional options
# sensor_type: ATC Semitec 104GT-2
#sensor_type: ATC Semitec 104GT-2
sensor_pin: PF4
min_temp: 10
max_temp: 270
@ -257,9 +257,9 @@ pid_kp = 26.213
pid_ki = 1.304
pid_kd = 131.721
## Try to keep pressure_advance below 1.0
# pressure_advance: 0.05
#pressure_advance: 0.05
## Default is 0.040, leave stock
# pressure_advance_smooth_time: 0.040
#pressure_advance_smooth_time: 0.040
## E0 on MOTOR6
## Make sure to update below for your relevant driver (2208 or 2209)
@ -281,7 +281,7 @@ stealthchop_threshold: 0
heater_pin: PA3
## Validate the following thermistor type to make sure it is correct
## See https://www.klipper3d.org/Config_Reference.html#common-thermistors for additional options
# sensor_type: Generic 3950
#sensor_type: Generic 3950
sensor_pin: PF3
## Adjust Max Power so your heater doesn't warp your bed. Rule of thumb is 0.4 watts / cm^2 .
max_power: 0.6
@ -302,11 +302,11 @@ pid_kd: 363.769
## Select the probe port by type:
## For the PROBE port. Will not work with Diode. May need pull-up resistor from signal to 24V.
# pin: ~!PB7
#pin: ~!PB7
## For the DIAG_7 port. NEEDS BAT85 DIODE! Change to !PG15 if probe is NO.
# pin: PG15
#pin: PG15
## For Octopus Pro PROBE port; NPN and PNP proximity switch types can be set by jumper
# pin: ~!PC5
#pin: ~!PC5
#--------------------------------------------------------------------