diff --git a/firmware/klipper_configurations/VORON2_stock_250_printer.cfg b/firmware/klipper_configurations/VORON2_stock_250_printer.cfg index 7e38aa6..1eb6049 100644 --- a/firmware/klipper_configurations/VORON2_stock_250_printer.cfg +++ b/firmware/klipper_configurations/VORON2_stock_250_printer.cfg @@ -242,13 +242,12 @@ max_temp: 270 # during deceleration. It is measured in millimeters per # millimeter/second. The default is 0, which disables pressure # advance. -# pressure_advance_lookahead_time: 0.010 -# A time (in seconds) to "look ahead" at future extrusion moves when -# calculating pressure advance. This is used to reduce the -# application of pressure advance during cornering moves that would -# otherwise cause retraction followed immediately by pressure -# buildup. This setting only applies if pressure_advance is -# non-zero. The default is 0.010 (10 milliseconds). +# pressure_advance_smooth_time: 0.040 +# A time range (in seconds) to use when calculating the average +# extruder velocity for pressure advance. A larger value results in +# smoother extruder movements. This parameter may not exceed 200ms. +# This setting only applies if pressure_advance is non-zero. The +# default is 0.040 (40 milliseconds). [probe] # Inductive Probe diff --git a/firmware/klipper_configurations/VORON2_stock_300_printer.cfg b/firmware/klipper_configurations/VORON2_stock_300_printer.cfg index 45fcc88..8a7c8da 100644 --- a/firmware/klipper_configurations/VORON2_stock_300_printer.cfg +++ b/firmware/klipper_configurations/VORON2_stock_300_printer.cfg @@ -242,13 +242,12 @@ max_temp: 270 # during deceleration. It is measured in millimeters per # millimeter/second. The default is 0, which disables pressure # advance. -# pressure_advance_lookahead_time: 0.010 -# A time (in seconds) to "look ahead" at future extrusion moves when -# calculating pressure advance. This is used to reduce the -# application of pressure advance during cornering moves that would -# otherwise cause retraction followed immediately by pressure -# buildup. This setting only applies if pressure_advance is -# non-zero. The default is 0.010 (10 milliseconds). +# pressure_advance_smooth_time: 0.040 +# A time range (in seconds) to use when calculating the average +# extruder velocity for pressure advance. A larger value results in +# smoother extruder movements. This parameter may not exceed 200ms. +# This setting only applies if pressure_advance is non-zero. The +# default is 0.040 (40 milliseconds). [probe] # Inductive Probe diff --git a/firmware/klipper_configurations/VORON2_stock_350_printer.cfg b/firmware/klipper_configurations/VORON2_stock_350_printer.cfg index ccf3a05..6cda961 100644 --- a/firmware/klipper_configurations/VORON2_stock_350_printer.cfg +++ b/firmware/klipper_configurations/VORON2_stock_350_printer.cfg @@ -242,13 +242,12 @@ max_temp: 270 # during deceleration. It is measured in millimeters per # millimeter/second. The default is 0, which disables pressure # advance. -# pressure_advance_lookahead_time: 0.010 -# A time (in seconds) to "look ahead" at future extrusion moves when -# calculating pressure advance. This is used to reduce the -# application of pressure advance during cornering moves that would -# otherwise cause retraction followed immediately by pressure -# buildup. This setting only applies if pressure_advance is -# non-zero. The default is 0.010 (10 milliseconds). +# pressure_advance_smooth_time: 0.040 +# A time range (in seconds) to use when calculating the average +# extruder velocity for pressure advance. A larger value results in +# smoother extruder movements. This parameter may not exceed 200ms. +# This setting only applies if pressure_advance is non-zero. The +# default is 0.040 (40 milliseconds). [probe] # Inductive Probe