From 79a5adf559b29819534c7472955c128c01d98a7d Mon Sep 17 00:00:00 2001 From: nemgrea <52015997+nemgrea@users.noreply.github.com> Date: Fri, 4 Feb 2022 09:05:35 -0600 Subject: [PATCH] change interpolation to False for all configs (#300) * Update Voron2_SKR_13_Config.cfg * Update Voron2_SKR_14_Config.cfg * Update Voron2_Spider_Config.cfg --- .../SKR_1.3/Voron2_SKR_13_Config.cfg | 12 ++++++------ .../SKR_1.4/Voron2_SKR_14_Config.cfg | 12 ++++++------ .../Spider/Voron2_Spider_Config.cfg | 12 ++++++------ 3 files changed, 18 insertions(+), 18 deletions(-) diff --git a/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg b/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg index df12fbc..d244b72 100644 --- a/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg +++ b/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg @@ -124,7 +124,7 @@ homing_positive_dir: true ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_x] uart_pin: P1.17 -interpolate: True +interpolate: False run_current: 0.8 hold_current: 0.7 sense_resistor: 0.110 @@ -162,7 +162,7 @@ homing_positive_dir: true ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_y] uart_pin: P1.15 -interpolate: True +interpolate: False run_current: 0.8 hold_current: 0.7 sense_resistor: 0.110 @@ -207,7 +207,7 @@ homing_retract_dist: 3 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z] uart_pin: z:P1.17 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.8 sense_resistor: 0.110 @@ -226,7 +226,7 @@ microsteps: 16 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z1] uart_pin: z:P1.15 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.80 sense_resistor: 0.110 @@ -245,7 +245,7 @@ microsteps: 16 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z2] uart_pin: z:P1.10 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.80 sense_resistor: 0.110 @@ -264,7 +264,7 @@ microsteps: 16 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z3] uart_pin: z:P1.8 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.80 sense_resistor: 0.110 diff --git a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg index 7a406b4..a7fbed8 100644 --- a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg +++ b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg @@ -124,7 +124,7 @@ homing_positive_dir: true ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_x] uart_pin: P1.10 -interpolate: True +interpolate: False run_current: 0.8 hold_current: 0.7 sense_resistor: 0.110 @@ -162,7 +162,7 @@ homing_positive_dir: true ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_y] uart_pin: P1.9 -interpolate: True +interpolate: False run_current: 0.8 hold_current: 0.7 sense_resistor: 0.110 @@ -207,7 +207,7 @@ homing_retract_dist: 3 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z] uart_pin: z:P1.10 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.8 sense_resistor: 0.110 @@ -226,7 +226,7 @@ microsteps: 16 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z1] uart_pin: z:P1.9 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.8 sense_resistor: 0.110 @@ -245,7 +245,7 @@ microsteps: 16 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z2] uart_pin: z:P1.8 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.80 sense_resistor: 0.110 @@ -264,7 +264,7 @@ microsteps: 16 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z3] uart_pin: z:P1.4 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.80 sense_resistor: 0.110 diff --git a/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg b/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg index 03dc59b..7051e02 100644 --- a/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg +++ b/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg @@ -64,7 +64,7 @@ homing_positive_dir: true ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_x] uart_pin: PE7 -interpolate: True +interpolate: False run_current: 0.8 hold_current: 0.7 sense_resistor: 0.110 @@ -102,7 +102,7 @@ homing_positive_dir: true ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_y] uart_pin: PE15 -interpolate: True +interpolate: False run_current: 0.8 hold_current: 0.7 sense_resistor: 0.110 @@ -148,7 +148,7 @@ homing_retract_dist: 3 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z] uart_pin: PD10 -interpolate: True +interpolate: False run_current: 0.8 hold_current: 0.8 sense_resistor: 0.110 @@ -167,7 +167,7 @@ microsteps: 16 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z1] uart_pin: PC14 -interpolate: True +interpolate: False run_current: 0.8 hold_current: 0.8 sense_resistor: 0.110 @@ -186,7 +186,7 @@ microsteps: 16 ## Make sure to update below for your relevant driver (2208 or 2209) [tmc2209 stepper_z2] uart_pin: PC15 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.8 sense_resistor: 0.110 @@ -204,7 +204,7 @@ microsteps: 16 [tmc2209 stepper_z3] uart_pin: PA15 -interpolate: true +interpolate: False run_current: 0.8 hold_current: 0.8 sense_resistor: 0.110