diff --git a/Mods/README.md b/Mods/README.md index 3261452..8d4fa42 100644 --- a/Mods/README.md +++ b/Mods/README.md @@ -23,29 +23,29 @@ The list should be structured in the following way: [Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/Mods/3D_Black) -- Different fan covers for 40mm fans +- Different fan covers for 40mm fans. ## Andreq [Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Andreq/VORON2) -- Tool used for grinding flats on a shaft at specific places +- Tool used for grinding flats on a shaft at specific places. ## ArmyAg08 [Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Logitech_C270_Mounts) -- Different C270 camera mounts, attached to the extrusions +- Different C270 camera mounts, attached to the extrusions. [Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Panels) -- Corner panel clip that fit 3mm or 1/8" panels with foam tape +- Corner panel clip that fit 3mm or 1/8" panels with foam tape. ## Danowar [F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/F6_Board_Mount) -- Mounts for FYSETCS F6 controller boards +- Mounts for FYSETCS F6 controller boards. [FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/FYSETC_F6_V1.3_Klipper_Config) @@ -53,31 +53,31 @@ The list should be structured in the following way: [Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Load_Cell_Spool_Holder) -- Spool holder with built in weight scale +- Spool holder with built in weight scale. [Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Tablet_Mount) -- Detachable mount for tablet using magnets +- Detachable mount for tablet using magnets. ## FHeilmann [Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2_5mm_Parts) -- Parts modified for extrusions with 5mm gap +- Parts modified for extrusions with 5mm gap. [Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2.1_5mm_parts) -- Parts modified for extrusions with 5mm gap +- Parts modified for extrusions with 5mm gap. ## Fulg [PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Fulg/VORON2/PanelDue5) -- Mount for the PanelDue5 LCD display +- Mount for the PanelDue5 LCD display. ## GSL12 -[Wago 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GSL12/wago_221_mount) +[WAGO 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GSL12/wago_221_mount) ## Glowtape @@ -87,56 +87,237 @@ The list should be structured in the following way: [4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GustavtheMighty/4.3-Paneldue_Case) -- Case/mount for the 4.3 PanelDue LCD Display +- Case/mount for the 4.3 PanelDue LCD Display. ## Hackdoggo [BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Hackdoggo/V2/BMGobius) -- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears +- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears. ## Jass_on [Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on/Voron_2.1.1_Tempered_Glass) -- Panel clips and handles for using tempered glass side panels +- Panel clips and handles for using tempered glass side panels. [Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on) [SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on) -- SKR 1.3 mount with built in 40mm fan mount +- SKR 1.3 mount with built in 40mm fan mount. ## JeJeff [2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover) -- Slot covers for extrusions with 5mm slot width +- Slot covers for extrusions with 5mm slot width. [Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Cable_Tie_Mount) -- Cable tie mounts for 4mm cable ties +- Cable tie mounts for 4mm cable ties. [Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount) -- Main Plug Panel modified to hold a RJ45 ethernet socket +- Main Plug Panel modified to hold a RJ45 ethernet socket. + +## Jink + +[Coroplast mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Coroplast_Mount) + +- Mount / Bracket supporting the coroplast sheets. + +[Filament runout sensor mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount) + +[Left handed RAMPS mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount) + +- Mirrored RAMPS bracket. + +[Spool holder with scale](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Spool_Holder_With_Scale) + +[WAGO Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/WAGO_Mount) + +- Mount for 3x WAGO connectors. + +## JustinVoelker + +[Mains Plug Panel with RJ45](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JustinVoelker/VORON2) + +- Mains plug panel with ethernet cutout. + +## Koios + +[Front Panel Locks](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios/6mm_Glass) + +- Front panel locks for 6mm tempered glass panels. + +[Logitech C920 Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios) + +- Mount for C920 secured to the top front extrusion. + +[LED Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios) + +- Different mounts for LED light bars. + +## Railgunner + +[Dual Direct Drive X Carriage](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Railgunner/10mmBMGx2) + +- Dual direct drive using 2x Bondtech BMG. + +## Seamen + +[RAMPS Extender Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Railgunner/10mmBMGx2) + +- Mount for RAMPS board with the stepper extender. + +## Sparreau + +[5V Power Supply Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau) + +[FSR Circuit Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau) + +- Bracket for mounting the FSR PCB. + +[Z Rail Stop](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau) + +[Bed Extrusion Spacer](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau) + +[Dial Indicator Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau) + +- Mount for attaching a dial indicator to the X Carriage. + +[Mains Plug Panel Parametric](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau) + +- Scalable mains plug panel with small modifications. + +[Z Idler Frame Extra Tab](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau) + +- An extra tab added to the Z idler to prevent sagging / rotation. + +## Stephan + +[M12 Probeholder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Stephan/M12_probeholder) + +- Drop in replacement of the stock probe to a M12. + +[BlTouch Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Stephan/bltouch_mount) + +- Drop in replacement of the stock probe to a BLTouch. + +## Volcom8190 + +[Nozzle Scrubber](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Volcom8190/V2_and_V2.1/Nozzle_Scrubber) + +- Mount for brass brush with added waste bucket. + +[Panels - Handles - Skirts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Volcom8190/V2_and_V2.1/Panels) + +- Different panels, skirts, handles and some mods for the filtered mains. + +## daveidmx + +[30mm Fan Adapter](https://github.com/VoronDesign/Voron-2/tree/master/Mods/daveidmx/VORON2) + +- 30mm fan adapter for the X carriage. + +## etherwalker + +[Pi Zero Camera Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/etherwalker/Pi_Zero_Camera_Mount) + +## exquyre + +[Anet 12864 Display](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/Anet_12864_display) + +- Case for Anet 12864 LCD display. + +[LED Bar Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/LED_bar_mount) + +- Mount for 12V LED bars to the top extrusions. + +[Cable Cover Insert](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/cable_cover) + +- Room for 3-4 20AWG wires. + +[Einsy + RAMPS Combo](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/einsy%2Bramps) + +- Mounting bracket for 1 Einsy and 1 RAMPS. + +## hiemmer + +[Tool Holders](https://github.com/VoronDesign/Voron-2/tree/master/Mods/hiemmer/Tool_Holders) + +- Tool holder for calipers, screwdriver etc. + +## nemgrea + +[Magnetic Split Front Door](https://github.com/VoronDesign/Voron-2/tree/master/Mods/nemgrea/magnetic_split_front_door) + +- Hinges, handles and magnet mounts for creating a split front door panel. + +## pnokel + +[Cable Zipper](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel) + +- Small mount to secure wires with zip ties. + +[Coroplast holders](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel) + +- Different coroplast holders for added support. + +[Toothed Idler](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel) + +- 14.5mm toothed idler. + +## steve450 + +[Corner Brackets](https://github.com/VoronDesign/Voron-2/tree/master/Mods/steve450/Voron2.1) + +- Corner brackets preventing rotation of the extrusions, and stiffening the joints. +Also covers the Z-belt hole for improved aesthetics. + +## synfinatic + +[Duet Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/Duet-Fan-Mount) + +- Duet/Duex fan mount with air vents directly above the steppers to increase airflow. + +[E-Stop Switch](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/E-Stop-Switch) + +- Mount for emergency button attached to the top of the printer. + +[Filament DryBox](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/Filament-DryBox) + +- Mount for filament drybox attached to the side of the printer. + +[LED Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/LED-Mount) + +- Mount for LED lightbars. + +[PS Extra Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/PS-Extra-Bracket) + +- Extra bracket to keep the power supply in place. + +[RJ45 Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/RJ45-Mount) + +- Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient. ## wile.e.coyote [Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote) -- Support for the coroplast to prevent sagging +- Support for the coroplast to prevent sagging. [Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote) -- Mounting bracket for 2 buck converters +- Mounting bracket for 2 buck converters. [Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote) -- Mount for brass brush. Used for cleaning nozzle before printing +- Mount for brass brush. Used for cleaning nozzle before printing. [Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote) -- Different mounts for Wago connectors +- Different mounts for Wago connectors. ---