Stock config safety tweak (#217)
* Update Voron2_SKR_13_Config.cfg * Update Voron2_SKR_14_Config.cfg * Update Voron2_SKR_13_Config.cfg * Update Voron2_SKR_14_Config.cfg * Update Voron2_SKR_14_Config.cfg revised to use SAFE_Z_HOME instead of HOMING_OVERRIDE Note: this also involved moving the final toolhead position move to the G32 macro, and making G32 the default action in the PRINT_START macro, rather than G28 Ideally, merge should be done roughly in sync with updated documentation going live. * minor cleanup * Update Voron2_SKR_13_Config.cfg matching changes to SKR 1.4 update
This commit is contained in:
shiftingtech
parent
fc455ca918
commit
30edba8351
GPG Key ID:
4AEE18F83AFDEB23
@ -3,7 +3,8 @@
|
|||||||
## *** THINGS TO CHANGE/CHECK: ***
|
## *** THINGS TO CHANGE/CHECK: ***
|
||||||
## MCU paths [mcu] section
|
## MCU paths [mcu] section
|
||||||
## Thermistor types [extruder] and [heater_bed] sections - See 'sensor types' list at end of file
|
## Thermistor types [extruder] and [heater_bed] sections - See 'sensor types' list at end of file
|
||||||
## Z Endstop Switch location [homing_override] section
|
## Z Endstop Switch location [safe_z_home] section
|
||||||
|
## Homing end position [gcode_macro G32] section
|
||||||
## Z Endstop Switch offset for Z0 [stepper_z] section
|
## Z Endstop Switch offset for Z0 [stepper_z] section
|
||||||
## Probe points [quad_gantry_level] section
|
## Probe points [quad_gantry_level] section
|
||||||
## Min & Max gantry corner postions [quad_gantry_level] section
|
## Min & Max gantry corner postions [quad_gantry_level] section
|
||||||
@ -416,33 +417,14 @@ heater_temp: 45.0
|
|||||||
[idle_timeout]
|
[idle_timeout]
|
||||||
timeout: 1800
|
timeout: 1800
|
||||||
|
|
||||||
[homing_override]
|
[safe_z_home]
|
||||||
axes: z
|
## XY Location of the Z Endstop Switch
|
||||||
set_position_z: 0
|
## Update -10,-10 to the XY coordinates of your endstop pin
|
||||||
gcode:
|
## (such as 157,305) after going through Z Endstop Pin
|
||||||
G90
|
## Location Definition step.
|
||||||
G0 Z5 F600
|
home_xy_position:-10,-10
|
||||||
G28 X Y
|
speed:100
|
||||||
## XY Location of the Z Endstop Switch
|
z_hop:10
|
||||||
## Update X0 and Y0 to your values (such as X157, Y305) after going through
|
|
||||||
## Z Endstop Pin Location Definition step.
|
|
||||||
G0 X0 Y0 F3600
|
|
||||||
|
|
||||||
G28 Z
|
|
||||||
G0 Z10 F1800
|
|
||||||
|
|
||||||
## Uncomment for for your size printer:
|
|
||||||
#--------------------------------------------------------------------
|
|
||||||
## Uncomment for 250mm build
|
|
||||||
#G0 X125 Y125 Z30 F3600
|
|
||||||
|
|
||||||
## Uncomment for 300 build
|
|
||||||
#G0 X150 Y150 Z30 F3600
|
|
||||||
|
|
||||||
## Uncomment for 350mm build
|
|
||||||
#G0 X175 Y175 Z30 F3600
|
|
||||||
#--------------------------------------------------------------------
|
|
||||||
|
|
||||||
|
|
||||||
[quad_gantry_level]
|
[quad_gantry_level]
|
||||||
## Use QUAD_GANTRY_LEVEL to level a gantry.
|
## Use QUAD_GANTRY_LEVEL to level a gantry.
|
||||||
@ -557,12 +539,22 @@ gcode:
|
|||||||
G28
|
G28
|
||||||
QUAD_GANTRY_LEVEL
|
QUAD_GANTRY_LEVEL
|
||||||
G28
|
G28
|
||||||
G0 X150 Y150 Z20 F6000
|
## Uncomment for for your size printer:
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
## Uncomment for 250mm build
|
||||||
|
#G0 X125 Y125 Z30 F3600
|
||||||
|
|
||||||
|
## Uncomment for 300 build
|
||||||
|
#G0 X150 Y150 Z30 F3600
|
||||||
|
|
||||||
|
## Uncomment for 350mm build
|
||||||
|
#G0 X175 Y175 Z30 F3600
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
|
||||||
[gcode_macro PRINT_START]
|
[gcode_macro PRINT_START]
|
||||||
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
||||||
gcode:
|
gcode:
|
||||||
G28 ; home all axes
|
G32 ; home all axes
|
||||||
G1 Z20 F3000 ; move nozzle away from bed
|
G1 Z20 F3000 ; move nozzle away from bed
|
||||||
|
|
||||||
|
|
||||||
|
|||||||
@ -3,7 +3,8 @@
|
|||||||
## *** THINGS TO CHANGE/CHECK: ***
|
## *** THINGS TO CHANGE/CHECK: ***
|
||||||
## MCU paths [mcu] section
|
## MCU paths [mcu] section
|
||||||
## Thermistor types [extruder] and [heater_bed] sections - See 'sensor types' list at end of file
|
## Thermistor types [extruder] and [heater_bed] sections - See 'sensor types' list at end of file
|
||||||
## Z Endstop Switch location [homing_override] section
|
## Z Endstop Switch location [safe_z_home] section
|
||||||
|
## Homing end position [gcode_macro G32] section
|
||||||
## Z Endstop Switch offset for Z0 [stepper_z] section
|
## Z Endstop Switch offset for Z0 [stepper_z] section
|
||||||
## Probe points [quad_gantry_level] section
|
## Probe points [quad_gantry_level] section
|
||||||
## Min & Max gantry corner postions [quad_gantry_level] section
|
## Min & Max gantry corner postions [quad_gantry_level] section
|
||||||
@ -416,33 +417,14 @@ heater_temp: 45.0
|
|||||||
[idle_timeout]
|
[idle_timeout]
|
||||||
timeout: 1800
|
timeout: 1800
|
||||||
|
|
||||||
[homing_override]
|
[safe_z_home]
|
||||||
axes: z
|
## XY Location of the Z Endstop Switch
|
||||||
set_position_z: 0
|
## Update -10,-10 to the XY coordinates of your endstop pin
|
||||||
gcode:
|
## (such as 157,305) after going through Z Endstop Pin
|
||||||
G90
|
## Location Definition step.
|
||||||
G0 Z5 F600
|
home_xy_position:-10,-10
|
||||||
G28 X Y
|
speed:100
|
||||||
## XY Location of the Z Endstop Switch
|
z_hop:10
|
||||||
## Update X0 and Y0 to your values (such as X157, Y305) after going through
|
|
||||||
## Z Endstop Pin Location Definition step.
|
|
||||||
G0 X0 Y0 F3600
|
|
||||||
|
|
||||||
G28 Z
|
|
||||||
G0 Z10 F1800
|
|
||||||
|
|
||||||
## Uncomment for for your size printer:
|
|
||||||
#--------------------------------------------------------------------
|
|
||||||
## Uncomment for 250mm build
|
|
||||||
#G0 X125 Y125 Z30 F3600
|
|
||||||
|
|
||||||
## Uncomment for 300 build
|
|
||||||
#G0 X150 Y150 Z30 F3600
|
|
||||||
|
|
||||||
## Uncomment for 350mm build
|
|
||||||
#G0 X175 Y175 Z30 F3600
|
|
||||||
#--------------------------------------------------------------------
|
|
||||||
|
|
||||||
|
|
||||||
[quad_gantry_level]
|
[quad_gantry_level]
|
||||||
## Use QUAD_GANTRY_LEVEL to level a gantry.
|
## Use QUAD_GANTRY_LEVEL to level a gantry.
|
||||||
@ -556,12 +538,22 @@ gcode:
|
|||||||
G28
|
G28
|
||||||
QUAD_GANTRY_LEVEL
|
QUAD_GANTRY_LEVEL
|
||||||
G28
|
G28
|
||||||
G0 X150 Y150 Z20 F6000
|
## Uncomment for for your size printer:
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
## Uncomment for 250mm build
|
||||||
|
#G0 X125 Y125 Z30 F3600
|
||||||
|
|
||||||
|
## Uncomment for 300 build
|
||||||
|
#G0 X150 Y150 Z30 F3600
|
||||||
|
|
||||||
|
## Uncomment for 350mm build
|
||||||
|
#G0 X175 Y175 Z30 F3600
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
|
||||||
[gcode_macro PRINT_START]
|
[gcode_macro PRINT_START]
|
||||||
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
||||||
gcode:
|
gcode:
|
||||||
G28 ; home all axes
|
G32 ; home all axes
|
||||||
G1 Z20 F3000 ; move nozzle away from bed
|
G1 Z20 F3000 ; move nozzle away from bed
|
||||||
|
|
||||||
|
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user