diff --git a/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg b/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg
index ef91d3c..7741618 100644
--- a/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg
+++ b/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg
@@ -306,9 +306,9 @@ pid_kp = 26.213
 pid_ki = 1.304
 pid_kd = 131.721
 ##	Try to keep pressure_advance below 1.0
-pressure_advance: 0.05
+#pressure_advance: 0.05
 ##	Default is 0.040, leave stock
-pressure_advance_smooth_time: 0.040
+#pressure_advance_smooth_time: 0.040
 
 ##	E0 on MCU X/Y
 ##	Make sure to update below for your relevant driver (2208 or 2209)
diff --git a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
index 23b8bdc..2b3dbf8 100644
--- a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
+++ b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
@@ -306,9 +306,9 @@ pid_kp = 26.213
 pid_ki = 1.304
 pid_kd = 131.721
 ##	Try to keep pressure_advance below 1.0
-pressure_advance: 0.05
+#pressure_advance: 0.05
 ##	Default is 0.040, leave stock
-pressure_advance_smooth_time: 0.040
+#pressure_advance_smooth_time: 0.040
 
 ##	E0 on MCU X/Y
 ##	Make sure to update below for your relevant driver (2208 or 2209)
diff --git a/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg b/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg
index 9fadb1c..95db662 100644
--- a/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg
+++ b/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg
@@ -249,9 +249,9 @@ pid_kp = 26.213
 pid_ki = 1.304
 pid_kd = 131.721
 ##	Try to keep pressure_advance below 1.0
-pressure_advance: 0.05
+#pressure_advance: 0.05
 ##	Default is 0.040, leave stock
-pressure_advance_smooth_time: 0.040
+#pressure_advance_smooth_time: 0.040
 
 ##	In E0-MOT Position
 ##	Make sure to update below for your relevant driver (2208 or 2209)