OSHW-DEIMOS/SOFTWARE/A64-TERES/linux-a64/drivers/mfd/wm8350-core.c

/*
 * wm8350-core.c  --  Device access for Wolfson WM8350
 *
 * Copyright 2007, 2008 Wolfson Microelectronics PLC.
 *
 * Author: Liam Girdwood, Mark Brown
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/regmap.h>
#include <linux/workqueue.h>

#include <linux/mfd/wm8350/core.h>
#include <linux/mfd/wm8350/audio.h>
#include <linux/mfd/wm8350/comparator.h>
#include <linux/mfd/wm8350/gpio.h>
#include <linux/mfd/wm8350/pmic.h>
#include <linux/mfd/wm8350/rtc.h>
#include <linux/mfd/wm8350/supply.h>
#include <linux/mfd/wm8350/wdt.h>

#define WM8350_CLOCK_CONTROL_1		0x28
#define WM8350_AIF_TEST			0x74

/* debug */
#define WM8350_BUS_DEBUG 0
#if WM8350_BUS_DEBUG
#define dump(regs, src) do { \
	int i_; \
	u16 *src_ = src; \
	printk(KERN_DEBUG); \
	for (i_ = 0; i_ < regs; i_++) \
		printk(" 0x%4.4x", *src_++); \
	printk("\n"); \
} while (0);
#else
#define dump(bytes, src)
#endif

#define WM8350_LOCK_DEBUG 0
#if WM8350_LOCK_DEBUG
#define ldbg(format, arg...) printk(format, ## arg)
#else
#define ldbg(format, arg...)
#endif

/*
 * WM8350 Device IO
 */
static DEFINE_MUTEX(reg_lock_mutex);

/*
 * Safe read, modify, write methods
 */
int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
{
	return regmap_update_bits(wm8350->regmap, reg, mask, 0);
}
EXPORT_SYMBOL_GPL(wm8350_clear_bits);

int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
{
	return regmap_update_bits(wm8350->regmap, reg, mask, mask);
}
EXPORT_SYMBOL_GPL(wm8350_set_bits);

u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
{
	unsigned int data;
	int err;

	err = regmap_read(wm8350->regmap, reg, &data);
	if (err)
		dev_err(wm8350->dev, "read from reg R%d failed\n", reg);

	return data;
}
EXPORT_SYMBOL_GPL(wm8350_reg_read);

int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
{
	int ret;

	ret = regmap_write(wm8350->regmap, reg, val);

	if (ret)
		dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
	return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_write);

int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
		      u16 *dest)
{
	int err = 0;

	err = regmap_bulk_read(wm8350->regmap, start_reg, dest, regs);
	if (err)
		dev_err(wm8350->dev, "block read starting from R%d failed\n",
			start_reg);

	return err;
}
EXPORT_SYMBOL_GPL(wm8350_block_read);

int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
		       u16 *src)
{
	int ret = 0;

	ret = regmap_bulk_write(wm8350->regmap, start_reg, src, regs);
	if (ret)
		dev_err(wm8350->dev, "block write starting at R%d failed\n",
			start_reg);

	return ret;
}
EXPORT_SYMBOL_GPL(wm8350_block_write);

/**
 * wm8350_reg_lock()
 *
 * The WM8350 has a hardware lock which can be used to prevent writes to
 * some registers (generally those which can cause particularly serious
 * problems if misused).  This function enables that lock.
 */
int wm8350_reg_lock(struct wm8350 *wm8350)
{
	int ret;

	mutex_lock(&reg_lock_mutex);

	ldbg(__func__);

	ret = wm8350_reg_write(wm8350, WM8350_SECURITY, WM8350_LOCK_KEY);
	if (ret)
		dev_err(wm8350->dev, "lock failed\n");

	wm8350->unlocked = false;

	mutex_unlock(&reg_lock_mutex);

	return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_lock);

/**
 * wm8350_reg_unlock()
 *
 * The WM8350 has a hardware lock which can be used to prevent writes to
 * some registers (generally those which can cause particularly serious
 * problems if misused).  This function disables that lock so updates
 * can be performed.  For maximum safety this should be done only when
 * required.
 */
int wm8350_reg_unlock(struct wm8350 *wm8350)
{
	int ret;

	mutex_lock(&reg_lock_mutex);

	ldbg(__func__);

	ret = wm8350_reg_write(wm8350, WM8350_SECURITY, WM8350_UNLOCK_KEY);
	if (ret)
		dev_err(wm8350->dev, "unlock failed\n");

	wm8350->unlocked = true;

	mutex_unlock(&reg_lock_mutex);

	return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_unlock);

int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
{
	u16 reg, result = 0;

	if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
		return -EINVAL;
	if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
	    && (scale != 0 || vref != 0))
		return -EINVAL;

	mutex_lock(&wm8350->auxadc_mutex);

	/* Turn on the ADC */
	reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
	wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);

	if (scale || vref) {
		reg = scale << 13;
		reg |= vref << 12;
		wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
	}

	reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
	reg |= 1 << channel | WM8350_AUXADC_POLL;
	wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);

	/* If a late IRQ left the completion signalled then consume
	 * the completion. */
	try_wait_for_completion(&wm8350->auxadc_done);

	/* We ignore the result of the completion and just check for a
	 * conversion result, allowing us to soldier on if the IRQ
	 * infrastructure is not set up for the chip. */
	wait_for_completion_timeout(&wm8350->auxadc_done, msecs_to_jiffies(5));

	reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
	if (reg & WM8350_AUXADC_POLL)
		dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
	else
		result = wm8350_reg_read(wm8350,
					 WM8350_AUX1_READBACK + channel);

	/* Turn off the ADC */
	reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
	wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
			 reg & ~WM8350_AUXADC_ENA);

	mutex_unlock(&wm8350->auxadc_mutex);

	return result & WM8350_AUXADC_DATA1_MASK;
}
EXPORT_SYMBOL_GPL(wm8350_read_auxadc);

static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
{
	struct wm8350 *wm8350 = irq_data;

	complete(&wm8350->auxadc_done);

	return IRQ_HANDLED;
}

/*
 * Register a client device.  This is non-fatal since there is no need to
 * fail the entire device init due to a single platform device failing.
 */
static void wm8350_client_dev_register(struct wm8350 *wm8350,
				       const char *name,
				       struct platform_device **pdev)
{
	int ret;

	*pdev = platform_device_alloc(name, -1);
	if (*pdev == NULL) {
		dev_err(wm8350->dev, "Failed to allocate %s\n", name);
		return;
	}

	(*pdev)->dev.parent = wm8350->dev;
	platform_set_drvdata(*pdev, wm8350);
	ret = platform_device_add(*pdev);
	if (ret != 0) {
		dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret);
		platform_device_put(*pdev);
		*pdev = NULL;
	}
}

int wm8350_device_init(struct wm8350 *wm8350, int irq,
		       struct wm8350_platform_data *pdata)
{
	int ret;
	unsigned int id1, id2, mask_rev;
	unsigned int cust_id, mode, chip_rev;

	dev_set_drvdata(wm8350->dev, wm8350);

	/* get WM8350 revision and config mode */
	ret = regmap_read(wm8350->regmap, WM8350_RESET_ID, &id1);
	if (ret != 0) {
		dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
		goto err;
	}

	ret = regmap_read(wm8350->regmap, WM8350_ID, &id2);
	if (ret != 0) {
		dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
		goto err;
	}

	ret = regmap_read(wm8350->regmap, WM8350_REVISION, &mask_rev);
	if (ret != 0) {
		dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
		goto err;
	}

	if (id1 != 0x6143) {
		dev_err(wm8350->dev,
			"Device with ID %x is not a WM8350\n", id1);
		ret = -ENODEV;
		goto err;
	}

	mode = id2 & WM8350_CONF_STS_MASK >> 10;
	cust_id = id2 & WM8350_CUST_ID_MASK;
	chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
	dev_info(wm8350->dev,
		 "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
		 mode, cust_id, mask_rev, chip_rev);

	if (cust_id != 0) {
		dev_err(wm8350->dev, "Unsupported CUST_ID\n");
		ret = -ENODEV;
		goto err;
	}

	switch (mask_rev) {
	case 0:
		wm8350->pmic.max_dcdc = WM8350_DCDC_6;
		wm8350->pmic.max_isink = WM8350_ISINK_B;

		switch (chip_rev) {
		case WM8350_REV_E:
			dev_info(wm8350->dev, "WM8350 Rev E\n");
			break;
		case WM8350_REV_F:
			dev_info(wm8350->dev, "WM8350 Rev F\n");
			break;
		case WM8350_REV_G:
			dev_info(wm8350->dev, "WM8350 Rev G\n");
			wm8350->power.rev_g_coeff = 1;
			break;
		case WM8350_REV_H:
			dev_info(wm8350->dev, "WM8350 Rev H\n");
			wm8350->power.rev_g_coeff = 1;
			break;
		default:
			/* For safety we refuse to run on unknown hardware */
			dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
			ret = -ENODEV;
			goto err;
		}
		break;

	case 1:
		wm8350->pmic.max_dcdc = WM8350_DCDC_4;
		wm8350->pmic.max_isink = WM8350_ISINK_A;

		switch (chip_rev) {
		case 0:
			dev_info(wm8350->dev, "WM8351 Rev A\n");
			wm8350->power.rev_g_coeff = 1;
			break;

		case 1:
			dev_info(wm8350->dev, "WM8351 Rev B\n");
			wm8350->power.rev_g_coeff = 1;
			break;

		default:
			dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
			ret = -ENODEV;
			goto err;
		}
		break;

	case 2:
		wm8350->pmic.max_dcdc = WM8350_DCDC_6;
		wm8350->pmic.max_isink = WM8350_ISINK_B;

		switch (chip_rev) {
		case 0:
			dev_info(wm8350->dev, "WM8352 Rev A\n");
			wm8350->power.rev_g_coeff = 1;
			break;

		default:
			dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
			ret = -ENODEV;
			goto err;
		}
		break;

	default:
		dev_err(wm8350->dev, "Unknown MASK_REV\n");
		ret = -ENODEV;
		goto err;
	}

	mutex_init(&wm8350->auxadc_mutex);
	init_completion(&wm8350->auxadc_done);

	ret = wm8350_irq_init(wm8350, irq, pdata);
	if (ret < 0)
		goto err;

	if (wm8350->irq_base) {
		ret = request_threaded_irq(wm8350->irq_base +
					   WM8350_IRQ_AUXADC_DATARDY,
					   NULL, wm8350_auxadc_irq, 0,
					   "auxadc", wm8350);
		if (ret < 0)
			dev_warn(wm8350->dev,
				 "Failed to request AUXADC IRQ: %d\n", ret);
	}

	if (pdata && pdata->init) {
		ret = pdata->init(wm8350);
		if (ret != 0) {
			dev_err(wm8350->dev, "Platform init() failed: %d\n",
				ret);
			goto err_irq;
		}
	}

	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);

	wm8350_client_dev_register(wm8350, "wm8350-codec",
				   &(wm8350->codec.pdev));
	wm8350_client_dev_register(wm8350, "wm8350-gpio",
				   &(wm8350->gpio.pdev));
	wm8350_client_dev_register(wm8350, "wm8350-hwmon",
				   &(wm8350->hwmon.pdev));
	wm8350_client_dev_register(wm8350, "wm8350-power",
				   &(wm8350->power.pdev));
	wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
	wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev));

	return 0;

err_irq:
	wm8350_irq_exit(wm8350);
err:
	return ret;
}
EXPORT_SYMBOL_GPL(wm8350_device_init);

void wm8350_device_exit(struct wm8350 *wm8350)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
		platform_device_unregister(wm8350->pmic.led[i].pdev);

	for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
		platform_device_unregister(wm8350->pmic.pdev[i]);

	platform_device_unregister(wm8350->wdt.pdev);
	platform_device_unregister(wm8350->rtc.pdev);
	platform_device_unregister(wm8350->power.pdev);
	platform_device_unregister(wm8350->hwmon.pdev);
	platform_device_unregister(wm8350->gpio.pdev);
	platform_device_unregister(wm8350->codec.pdev);

	if (wm8350->irq_base)
		free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);

	wm8350_irq_exit(wm8350);
}
EXPORT_SYMBOL_GPL(wm8350_device_exit);

MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
MODULE_LICENSE("GPL");