152 lines
4.9 KiB
C
152 lines
4.9 KiB
C
/*
|
|
* (C) Copyright 2007-2013
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Jerry Wang <wangflord@allwinnertech.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __spare_head_h__
|
|
#define __spare_head_h__
|
|
|
|
/* work mode */
|
|
#define WORK_MODE_PRODUCT (1<<4)
|
|
#define WORK_MODE_UPDATE (1<<5)
|
|
|
|
#define WORK_MODE_BOOT 0x00 //正常启动
|
|
#define WORK_MODE_USB_PRODUCT 0x10 //用于USB量产
|
|
#define WORK_MODE_CARD_PRODUCT 0x11 //用于卡量产
|
|
#define WORK_MODE_USB_DEBUG 0x12 //利用usb量产协议完成的测试
|
|
#define WORK_MODE_SPRITE_RECOVERY 0x13 //一键恢复
|
|
#define WORK_MODE_CARD_UPDATE 0x14 //update firmware from sdcard
|
|
#define WORK_MODE_USB_UPDATE 0x20 //用于USB升级
|
|
#define WORK_MODE_OUTER_UPDATE 0x21 //用于外部盘升级
|
|
|
|
#define WORK_MODE_USB_TOOL_PRODUCT 0x04 //用于量产
|
|
#define WORK_MODE_USB_TOOL_UPDATE 0x08 //用于升级
|
|
#define WORK_MODE_ERASE_KEY 0x20 //用于擦除key
|
|
|
|
#define UBOOT_MAGIC "uboot"
|
|
#define STAMP_VALUE 0x5F0A6C39
|
|
#define ALIGN_SIZE 16 * 1024
|
|
#define MAGIC_SIZE 8
|
|
#define STORAGE_BUFFER_SIZE (256)
|
|
|
|
#define SUNXI_UPDATE_NEXT_ACTION_NORMAL (1)
|
|
#define SUNXI_UPDATE_NEXT_ACTION_REBOOT (2)
|
|
#define SUNXI_UPDATE_NEXT_ACTION_SHUTDOWN (3)
|
|
#define SUNXI_UPDATE_NEXT_ACTION_REUPDATE (4)
|
|
#define SUNXI_UPDATE_NEXT_ACTION_BOOT (5)
|
|
#define SUNXI_UPDATA_NEXT_ACTION_SPRITE_TEST (6)
|
|
|
|
#define SUNXI_VBUS_UNKNOWN (0)
|
|
#define SUNXI_VBUS_EXIST (1)
|
|
#define SUNXI_VBUS_NOT_EXIST (2)
|
|
|
|
#define BOOT0_SDMMC_START_ADDR (16)
|
|
#define BOOT0_SDMMC_BACKUP_START_ADDR (256)
|
|
|
|
#define BOOT0_EMMC3_START_ADDR (384)
|
|
#define BOOT0_EMMC3_BACKUP_START_ADDR (512)
|
|
|
|
|
|
#ifndef CONFIG_SUNXI_SECURE_SYSTEM
|
|
#define UBOOT_START_SECTOR_IN_SDMMC (38192)
|
|
#else
|
|
#define UBOOT_START_SECTOR_IN_SDMMC (32800)
|
|
#define UBOOT_START_SECTOR_PRE_IN_SDMMC (38192)
|
|
#endif
|
|
|
|
|
|
#define SUNXI_NORMAL_MODE 0
|
|
#define SUNXI_SECURE_MODE_WITH_SECUREOS 1
|
|
#define SUNXI_SECURE_MODE_NO_SECUREOS 2
|
|
|
|
typedef enum _SUNXI_BOOT_FILE_MODE
|
|
{
|
|
SUNXI_BOOT_FILE_NORMAL =0,
|
|
SUNXI_BOOT_FILE_TOC = 1,
|
|
SUNXI_BOOT_FILE_RES0 = 2,
|
|
SUNXI_BOOT_FILE_RES1 = 3,
|
|
SUNXI_BOOT_FILE_PKG = 4
|
|
}SUNXI_BOOT_FILE_MODE;
|
|
|
|
|
|
|
|
#define BOOT_FROM_SD0 0
|
|
#define BOOT_FROM_SD2 2
|
|
#define BOOT_FROM_NFC 1
|
|
#define BOOT_FROM_SPI 3
|
|
|
|
//#define TOC_MAIN_INFO_STATUS_ENCRYP_NOT_USED 0x00
|
|
//#define TOC_MAIN_INFO_STATUS_ENCRYP_SSK 0x01
|
|
//#define TOC_MAIN_INFO_STATUS_ENCRYP_BSSK 0x02
|
|
#define SUNXI_SECURE_MODE_USE_SEC_MONITOR 1
|
|
|
|
#define TOC_ITEM_ENTRY_STATUS_ENCRYP_NOT_USED 0x00
|
|
#define TOC_ITEM_ENTRY_STATUS_ENCRYP_USED 0x01
|
|
|
|
#define TOC_ITEM_ENTRY_TYPE_NULL 0x00
|
|
#define TOC_ITEM_ENTRY_TYPE_KEY_CERTIF 0x01
|
|
#define TOC_ITEM_ENTRY_TYPE_BIN_CERTIF 0x02
|
|
#define TOC_ITEM_ENTRY_TYPE_BIN 0x03
|
|
#define TOC_ITEM_ENTRY_TYPE_LOGO 0x04
|
|
|
|
typedef struct _normal_gpio_cfg
|
|
{
|
|
char port; //端口号
|
|
char port_num; //端口内编号
|
|
char mul_sel; //功能编号
|
|
char pull; //电阻状态
|
|
char drv_level; //驱动驱动能力
|
|
char data; //输出电平
|
|
char reserved[2]; //保留位，保证对齐
|
|
}
|
|
normal_gpio_cfg;
|
|
|
|
typedef struct _special_gpio_cfg
|
|
{
|
|
unsigned char port; //端口号
|
|
unsigned char port_num; //端口内编号
|
|
char mul_sel; //功能编号
|
|
char data; //输出电平
|
|
}special_gpio_cfg;
|
|
//SD卡相关数据结构
|
|
typedef struct sdcard_spare_info_t
|
|
{
|
|
int card_no[4]; //当前启动的卡控制器编号
|
|
int speed_mode[4]; //卡的速度模式，0：低速，其它：高速
|
|
int line_sel[4]; //卡的线制，0: 1线，其它，4线
|
|
int line_count[4]; //卡使用线的个数
|
|
}
|
|
sdcard_spare_info;
|
|
|
|
typedef enum
|
|
{
|
|
STORAGE_NAND =0,
|
|
STORAGE_SD,
|
|
STORAGE_EMMC,
|
|
STORAGE_NOR,
|
|
STORAGE_EMMC3
|
|
}SUNXI_BOOT_STORAGE;
|
|
|
|
#endif
|
|
|
|
|