350 lines
7.2 KiB
C
350 lines
7.2 KiB
C
/*
|
|
* (C) Copyright 2000-2006
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
********************************************************************
|
|
*
|
|
* Lots of code copied from:
|
|
*
|
|
* m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
|
|
* (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
|
|
*
|
|
* "The ExCA standard specifies that socket controllers should provide
|
|
* two IO and five memory windows per socket, which can be independently
|
|
* configured and positioned in the host address space and mapped to
|
|
* arbitrary segments of card address space. " - David A Hinds. 1999
|
|
*
|
|
* This controller does _not_ meet the ExCA standard.
|
|
*
|
|
* m8xx pcmcia controller brief info:
|
|
* + 8 windows (attrib, mem, i/o)
|
|
* + up to two slots (SLOT_A and SLOT_B)
|
|
* + inputpins, outputpins, event and mask registers.
|
|
* - no offset register. sigh.
|
|
*
|
|
* Because of the lacking offset register we must map the whole card.
|
|
* We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
|
|
* Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
|
|
* * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
|
|
* The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
|
|
* They are maximum 64KByte each...
|
|
*/
|
|
|
|
/* #define DEBUG 1 */
|
|
|
|
/*
|
|
* PCMCIA support
|
|
*/
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <config.h>
|
|
#include <pcmcia.h>
|
|
#include <asm/io.h>
|
|
|
|
/* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_CMD_PCMCIA)
|
|
|
|
extern int pcmcia_on (void);
|
|
extern int pcmcia_off (void);
|
|
|
|
int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int rcode = 0;
|
|
|
|
if (argc != 2) {
|
|
printf ("Usage: pinit {on | off}\n");
|
|
return 1;
|
|
}
|
|
if (strcmp(argv[1],"on") == 0) {
|
|
rcode = pcmcia_on ();
|
|
} else if (strcmp(argv[1],"off") == 0) {
|
|
rcode = pcmcia_off ();
|
|
} else {
|
|
printf ("Usage: pinit {on | off}\n");
|
|
return 1;
|
|
}
|
|
|
|
return rcode;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
pinit, 2, 0, do_pinit,
|
|
"PCMCIA sub-system",
|
|
"on - power on PCMCIA socket\n"
|
|
"pinit off - power off PCMCIA socket"
|
|
);
|
|
|
|
#endif
|
|
|
|
/* -------------------------------------------------------------------- */
|
|
|
|
#undef CHECK_IDE_DEVICE
|
|
|
|
#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
|
|
#define CHECK_IDE_DEVICE
|
|
#endif
|
|
|
|
#if defined(CONFIG_PXA_PCMCIA)
|
|
#define CHECK_IDE_DEVICE
|
|
#endif
|
|
|
|
#ifdef CHECK_IDE_DEVICE
|
|
|
|
int ide_devices_found;
|
|
static uchar *known_cards[] = {
|
|
(uchar *)"ARGOSY PnPIDE D5",
|
|
NULL
|
|
};
|
|
|
|
#define MAX_TUPEL_SZ 512
|
|
#define MAX_FEATURES 4
|
|
|
|
#define MAX_IDENT_CHARS 64
|
|
#define MAX_IDENT_FIELDS 4
|
|
|
|
#define indent "\t "
|
|
|
|
static void print_funcid (int func)
|
|
{
|
|
puts (indent);
|
|
switch (func) {
|
|
case CISTPL_FUNCID_MULTI:
|
|
puts (" Multi-Function");
|
|
break;
|
|
case CISTPL_FUNCID_MEMORY:
|
|
puts (" Memory");
|
|
break;
|
|
case CISTPL_FUNCID_SERIAL:
|
|
puts (" Serial Port");
|
|
break;
|
|
case CISTPL_FUNCID_PARALLEL:
|
|
puts (" Parallel Port");
|
|
break;
|
|
case CISTPL_FUNCID_FIXED:
|
|
puts (" Fixed Disk");
|
|
break;
|
|
case CISTPL_FUNCID_VIDEO:
|
|
puts (" Video Adapter");
|
|
break;
|
|
case CISTPL_FUNCID_NETWORK:
|
|
puts (" Network Adapter");
|
|
break;
|
|
case CISTPL_FUNCID_AIMS:
|
|
puts (" AIMS Card");
|
|
break;
|
|
case CISTPL_FUNCID_SCSI:
|
|
puts (" SCSI Adapter");
|
|
break;
|
|
default:
|
|
puts (" Unknown");
|
|
break;
|
|
}
|
|
puts (" Card\n");
|
|
}
|
|
|
|
static void print_fixed (volatile uchar *p)
|
|
{
|
|
if (p == NULL)
|
|
return;
|
|
|
|
puts(indent);
|
|
|
|
switch (*p) {
|
|
case CISTPL_FUNCE_IDE_IFACE:
|
|
{ uchar iface = *(p+2);
|
|
|
|
puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
|
|
puts (" interface ");
|
|
break;
|
|
}
|
|
case CISTPL_FUNCE_IDE_MASTER:
|
|
case CISTPL_FUNCE_IDE_SLAVE:
|
|
{ uchar f1 = *(p+2);
|
|
uchar f2 = *(p+4);
|
|
|
|
puts ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
|
|
|
|
if (f1 & CISTPL_IDE_UNIQUE)
|
|
puts (" [unique]");
|
|
|
|
puts ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
|
|
|
|
if (f2 & CISTPL_IDE_HAS_SLEEP)
|
|
puts (" [sleep]");
|
|
|
|
if (f2 & CISTPL_IDE_HAS_STANDBY)
|
|
puts (" [standby]");
|
|
|
|
if (f2 & CISTPL_IDE_HAS_IDLE)
|
|
puts (" [idle]");
|
|
|
|
if (f2 & CISTPL_IDE_LOW_POWER)
|
|
puts (" [low power]");
|
|
|
|
if (f2 & CISTPL_IDE_REG_INHIBIT)
|
|
puts (" [reg inhibit]");
|
|
|
|
if (f2 & CISTPL_IDE_HAS_INDEX)
|
|
puts (" [index]");
|
|
|
|
if (f2 & CISTPL_IDE_IOIS16)
|
|
puts (" [IOis16]");
|
|
|
|
break;
|
|
}
|
|
}
|
|
putc ('\n');
|
|
}
|
|
|
|
static int identify (volatile uchar *p)
|
|
{
|
|
uchar id_str[MAX_IDENT_CHARS];
|
|
uchar data;
|
|
uchar *t;
|
|
uchar **card;
|
|
int i, done;
|
|
|
|
if (p == NULL)
|
|
return (0); /* Don't know */
|
|
|
|
t = id_str;
|
|
done =0;
|
|
|
|
for (i=0; i<=4 && !done; ++i, p+=2) {
|
|
while ((data = *p) != '\0') {
|
|
if (data == 0xFF) {
|
|
done = 1;
|
|
break;
|
|
}
|
|
*t++ = data;
|
|
if (t == &id_str[MAX_IDENT_CHARS-1]) {
|
|
done = 1;
|
|
break;
|
|
}
|
|
p += 2;
|
|
}
|
|
if (!done)
|
|
*t++ = ' ';
|
|
}
|
|
*t = '\0';
|
|
while (--t > id_str) {
|
|
if (*t == ' ')
|
|
*t = '\0';
|
|
else
|
|
break;
|
|
}
|
|
puts ((char *)id_str);
|
|
putc ('\n');
|
|
|
|
for (card=known_cards; *card; ++card) {
|
|
debug ("## Compare against \"%s\"\n", *card);
|
|
if (strcmp((char *)*card, (char *)id_str) == 0) { /* found! */
|
|
debug ("## CARD FOUND ##\n");
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
return (0); /* don't know */
|
|
}
|
|
|
|
int check_ide_device (int slot)
|
|
{
|
|
volatile uchar *ident = NULL;
|
|
volatile uchar *feature_p[MAX_FEATURES];
|
|
volatile uchar *p, *start, *addr;
|
|
int n_features = 0;
|
|
uchar func_id = ~0;
|
|
uchar code, len;
|
|
ushort config_base = 0;
|
|
int found = 0;
|
|
int i;
|
|
|
|
addr = (volatile uchar *)(CONFIG_SYS_PCMCIA_MEM_ADDR +
|
|
CONFIG_SYS_PCMCIA_MEM_SIZE * (slot * 4));
|
|
debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
|
|
|
|
start = p = (volatile uchar *) addr;
|
|
|
|
while ((p - start) < MAX_TUPEL_SZ) {
|
|
|
|
code = *p; p += 2;
|
|
|
|
if (code == 0xFF) { /* End of chain */
|
|
break;
|
|
}
|
|
|
|
len = *p; p += 2;
|
|
#if defined(DEBUG) && (DEBUG > 1)
|
|
{ volatile uchar *q = p;
|
|
printf ("\nTuple code %02x length %d\n\tData:",
|
|
code, len);
|
|
|
|
for (i = 0; i < len; ++i) {
|
|
printf (" %02x", *q);
|
|
q+= 2;
|
|
}
|
|
}
|
|
#endif /* DEBUG */
|
|
switch (code) {
|
|
case CISTPL_VERS_1:
|
|
ident = p + 4;
|
|
break;
|
|
case CISTPL_FUNCID:
|
|
/* Fix for broken SanDisk which may have 0x80 bit set */
|
|
func_id = *p & 0x7F;
|
|
break;
|
|
case CISTPL_FUNCE:
|
|
if (n_features < MAX_FEATURES)
|
|
feature_p[n_features++] = p;
|
|
break;
|
|
case CISTPL_CONFIG:
|
|
config_base = (*(p+6) << 8) + (*(p+4));
|
|
debug ("\n## Config_base = %04x ###\n", config_base);
|
|
default:
|
|
break;
|
|
}
|
|
p += 2 * len;
|
|
}
|
|
|
|
found = identify (ident);
|
|
|
|
if (func_id != ((uchar)~0)) {
|
|
print_funcid (func_id);
|
|
|
|
if (func_id == CISTPL_FUNCID_FIXED)
|
|
found = 1;
|
|
else
|
|
return (1); /* no disk drive */
|
|
}
|
|
|
|
for (i=0; i<n_features; ++i) {
|
|
print_fixed (feature_p[i]);
|
|
}
|
|
|
|
if (!found) {
|
|
printf ("unknown card type\n");
|
|
return (1);
|
|
}
|
|
|
|
ide_devices_found |= (1 << slot);
|
|
|
|
#if CONFIG_CPC45
|
|
#else
|
|
/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
|
|
*((uchar *)(addr + config_base)) = 1;
|
|
#endif
|
|
#if 0
|
|
printf("\n## Config_base = %04x ###\n", config_base);
|
|
printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
|
|
printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
|
|
printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
|
|
printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
#endif /* CHECK_IDE_DEVICE */
|