boot.cmd file added
Adopted for Teres/A64-OLinuXino
This commit is contained in:
Dimitar Gamishev
parent
e19b0611d7
commit
1a8f427281
216
SOFTWARE/A64-TERES/blobs/boot.cmd
Normal file
216
SOFTWARE/A64-TERES/blobs/boot.cmd
Normal file
@ -0,0 +1,216 @@
|
||||
# Adopted from:
|
||||
# https://github.com/igorpecovnik/lib/blob/master/config/bootscripts/boot-pine64-default.cmd
|
||||
# https://github.com/longsleep/u-boot-pine64/blob/55c9c8c8ac005b1c00ac948386c60c4a741ebaa9/include/configs/sun50iw1p1.h#L339
|
||||
# hehopmajieh@debian.bg Adopted for Olimex Teres/A64-OLinuXino
|
||||
# set_cmdline
|
||||
setenv bootargs "console=${console} enforcing=${enforcing} cma=${cma} ${optargs} androidboot.serialno=${sunxi_serial} androidboot.hardware=${hardware} androidboot.selinux=${selinux} earlyprintk=sunxi-uart,0x01c28000 loglevel=8 root=${root} eth0_speed=${eth0_speed}"
|
||||
|
||||
run load_dtb
|
||||
|
||||
# set display resolution from uEnv.txt or other environment file
|
||||
# default to 1080p30
|
||||
if test "${hdmi_mode}" = "480i"; then setenv fdt_hdmi_mode "<0x00000000>"
|
||||
elif test "${hdmi_mode}" = "576i"; then setenv fdt_hdmi_mode "<0x00000001>"
|
||||
elif test "${hdmi_mode}" = "480p"; then setenv fdt_hdmi_mode "<0x00000002>"
|
||||
elif test "${hdmi_mode}" = "576p"; then setenv fdt_hdmi_mode "<0x00000003>"
|
||||
elif test "${hdmi_mode}" = "720p50"; then setenv fdt_hdmi_mode "<0x00000004>"
|
||||
elif test "${hdmi_mode}" = "720p60"; then setenv fdt_hdmi_mode "<0x00000005>"
|
||||
elif test "${hdmi_mode}" = "1080i50"; then setenv fdt_hdmi_mode "<0x00000006>"
|
||||
elif test "${hdmi_mode}" = "1080i60"; then setenv fdt_hdmi_mode "<0x00000007>"
|
||||
elif test "${hdmi_mode}" = "1080p24"; then setenv fdt_hdmi_mode "<0x00000008>"
|
||||
elif test "${hdmi_mode}" = "1080p50"; then setenv fdt_hdmi_mode "<0x00000009>"
|
||||
elif test "${hdmi_mode}" = "1080p60"; then setenv fdt_hdmi_mode "<0x0000000a>"
|
||||
elif test "${hdmi_mode}" = "2160p30"; then setenv fdt_hdmi_mode "<0x0000001c>"
|
||||
elif test "${hdmi_mode}" = "2160p25"; then setenv fdt_hdmi_mode "<0x0000001d>"
|
||||
elif test "${hdmi_mode}" = "2160p24"; then setenv fdt_hdmi_mode "<0x0000001e>"
|
||||
elif test "${hdmi_mode}" = "800x480p"; then setenv fdt_hdmi_mode "<0x0000001f>"
|
||||
elif test "${hdmi_mode}" = "1024x600p"; then setenv fdt_hdmi_mode "<0x00000020>"
|
||||
else setenv fdt_hdmi_mode "<0x0000000a>"
|
||||
fi
|
||||
|
||||
if test "${fdt_hdmi_mode}" != ""; then
|
||||
echo "HDMI mode: ${fdt_hdmi_mode}"
|
||||
fdt set /soc@01c00000/boot_disp output_mode "<0x00000000>"
|
||||
fdt set /soc@01c00000/disp@01000000 screen0_output_mode "${fdt_hdmi_mode}"
|
||||
fdt set /soc@01c00000/disp@01000000 screen1_output_mode "${fdt_hdmi_mode}"
|
||||
fi
|
||||
|
||||
# set display for screen0
|
||||
if test "${disp_screen0}" = "lcd"; then
|
||||
echo "Using LCD for main screen"
|
||||
fdt set /soc@01c00000/disp@01000000 screen0_output_type "<0x00000001>"
|
||||
fdt set /soc@01c00000/boot_disp output_mode "<0x00000000>"
|
||||
|
||||
# enable LCD screen
|
||||
fdt set /soc@01c00000/lcd0@01c0c000 status "okay"
|
||||
fdt set /soc@01c00000/lcd0@01c0c000 lcd_used "<0x00000001>"
|
||||
|
||||
# disable HDMI screen
|
||||
fdt set /soc@01c00000/hdmi@01ee0000 status "disabled"
|
||||
|
||||
# enable touchpad
|
||||
fdt set /soc@01c00000/ctp status "okay"
|
||||
fdt set /soc@01c00000/ctp ctp_used "<0x00000001>"
|
||||
fdt set /soc@01c00000/ctp ctp_name "gt911_DB2"
|
||||
elif test "${disp_screen0}" = "hdmi"; then
|
||||
echo "Using HDMI for main screen"
|
||||
fdt set /soc@01c00000/boot_disp output_mode "<0x00000000>"
|
||||
fdt set /soc@01c00000/disp@01000000 screen0_output_type "<0x00000003>"
|
||||
|
||||
# enable HDMI screen
|
||||
fdt set /soc@01c00000/hdmi@01ee0000 status "okay"
|
||||
|
||||
# disable LCD screen
|
||||
fdt set /soc@01c00000/lcd0@01c0c000 status "disabled"
|
||||
fdt set /soc@01c00000/lcd0@01c0c000 lcd_used "<0x00000000>"
|
||||
fi
|
||||
|
||||
# set display for screen1
|
||||
if test "${disp_screen1}" = "lcd"; then
|
||||
echo "Using LCD for secondary screen"
|
||||
fdt set /soc@01c00000/disp@01000000 screen1_output_type "<0x00000001>"
|
||||
|
||||
# enable LCD screen
|
||||
fdt set /soc@01c00000/lcd0@01c0c000 status "okay"
|
||||
fdt set /soc@01c00000/lcd0@01c0c000 lcd_used "<0x00000001>"
|
||||
|
||||
# enable touchpad
|
||||
fdt set /soc@01c00000/ctp status "okay"
|
||||
fdt set /soc@01c00000/ctp ctp_used "<0x00000001>"
|
||||
fdt set /soc@01c00000/ctp ctp_name "gt911_DB2"
|
||||
elif test "${disp_screen1}" = "hdmi"; then
|
||||
echo "Using HDMI for secondary screen"
|
||||
fdt set /soc@01c00000/disp@01000000 screen1_output_type "<0x00000003>"
|
||||
|
||||
# enable HDMI screen
|
||||
fdt set /soc@01c00000/hdmi@01ee0000 status "okay"
|
||||
fi
|
||||
|
||||
# set disp_mode
|
||||
if test "${disp_mode}" = "screen0"; then
|
||||
echo "Using screen0 as display"
|
||||
fdt set /soc@01c00000/disp@01000000 disp_mode "<0x00000000>"
|
||||
elif test "${disp_mode}" = "screen1"; then
|
||||
echo "Using screen1 as display"
|
||||
fdt set /soc@01c00000/disp@01000000 disp_mode "<0x00000001>"
|
||||
elif test "${disp_mode}" = "dualhead"; then
|
||||
echo "Using screen0 and screen1 as separate displays"
|
||||
fdt set /soc@01c00000/disp@01000000 disp_mode "<0x00000002>"
|
||||
elif test "${disp_mode}" = "xinerama"; then
|
||||
echo "Using screen0 and screen1 as one large screen"
|
||||
fdt set /soc@01c00000/disp@01000000 disp_mode "<0x00000003>"
|
||||
elif test "${disp_mode}" = "clone"; then
|
||||
echo "Clonning screen0 and screen1"
|
||||
fdt set /soc@01c00000/disp@01000000 disp_mode "<0x00000004>"
|
||||
elif test "${disp_mode}" = "disabled"; then
|
||||
echo "Disabling all screens"
|
||||
fdt set /soc@01c00000/disp@01000000 disp_mode "<0x00000000>"
|
||||
fdt set /soc@01c00000/hdmi@01ee0000 status "disabled"
|
||||
fdt set /soc@01c00000/lcd0@01c0c000 status "disabled"
|
||||
fi
|
||||
|
||||
# HDMI CEC
|
||||
if test "${hdmi_cec}" = "2"; then
|
||||
echo "Using experimental HDMI CEC driver"
|
||||
fdt set /soc@01c00000/hdmi@01ee0000 hdmi_cec_support "<0x00000002>"
|
||||
else
|
||||
echo "HDMI CEC is disabled"
|
||||
fdt set /soc@01c00000/hdmi@01ee0000 hdmi_cec_support "<0x00000000>"
|
||||
fi
|
||||
|
||||
|
||||
# DVI compatibility
|
||||
if test "${disp_dvi_compat}" = "on"; then
|
||||
fdt set /soc@01c00000/hdmi@01ee0000 hdmi_hdcp_enable "<0x00000000>"
|
||||
fdt set /soc@01c00000/hdmi@01ee0000 hdmi_cts_compatibility "<0x00000001>"
|
||||
fi
|
||||
|
||||
# default, only set status
|
||||
if test "${camera_type}" = "s5k4ec"; then
|
||||
fdt set /soc@01c00000/vfe@0/ status "okay"
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ status "okay"
|
||||
fi
|
||||
|
||||
# change name, i2c address and vdd voltage
|
||||
if test "${camera_type}" = "ov5640"; then
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ csi0_dev0_mname "ov5640"
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ csi0_dev0_twi_addr "<0x00000078>"
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ csi0_dev0_iovdd_vol "<0x001b7740>"
|
||||
fdt set /soc@01c00000/vfe@0/ status "okay"
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ status "okay"
|
||||
fi
|
||||
|
||||
# set otg mode
|
||||
if test "${otg_mode}" = "device"; then
|
||||
echo "USB-OTG port is in device mode"
|
||||
fdt set /soc@01c00000/usbc0@0 usb_port_type "<0x00000000>"
|
||||
elif test "${otg_mode}" = "host"; then
|
||||
echo "USB-OTG port is in host mode"
|
||||
fdt set /soc@01c00000/usbc0@0 usb_port_type "<0x00000001>"
|
||||
elif test "${otg_mode}" = "otg"; then
|
||||
echo "USB-OTG port is in OTG mode"
|
||||
fdt set /soc@01c00000/usbc0@0 usb_port_type "<0x00000002>"
|
||||
fi
|
||||
|
||||
if test "${emmc_compat}" = "on"; then
|
||||
echo "Enabling eMMC compatibility mode (Use SDR)..."
|
||||
fdt rm /soc@01c00000/sdmmc@01C11000 mmc-ddr-1_8v;
|
||||
fdt rm /soc@01c00000/sdmmc@01C11000 mmc-hs200-1_8v;
|
||||
fdt rm /soc@01c00000/sdmmc@01C11000 mmc-hs400-1_8v;
|
||||
elif test "${emmc_compat}" = "150mhz"; then
|
||||
echo "Enabling eMMC HS200 150MHz mode..."
|
||||
fdt set /soc@01c00000/sdmmc@01C11000 max-frequency "<0x8F0D180>";
|
||||
elif test "${emmc_compat}" = "200mhz"; then
|
||||
echo "Enabling eMMC HS200 200MHz mode..."
|
||||
fdt set /soc@01c00000/sdmmc@01C11000 max-frequency "<0xBEBC200>";
|
||||
fi
|
||||
|
||||
# Execute user command
|
||||
if test "${user_cmd}" != ""; then
|
||||
echo "Executing ${user_cmd}..."
|
||||
run user_cmd
|
||||
fi
|
||||
|
||||
if test "${boot_part}" = ""; then
|
||||
setenv boot_part "0:1"
|
||||
fi
|
||||
|
||||
# Re-order SD or eMMC to always be a first device when booting
|
||||
if test "${boot_part}" = "0:1"; then
|
||||
echo "Booting from SD so moving eMMC definition..."
|
||||
fdt resize
|
||||
fdt dup /soc@01c00000/ sdmmc@01C11000 sdmmc@01C11001
|
||||
fdt rm /soc@01c00000/sdmmc@01C11000/
|
||||
else
|
||||
echo "Booting from eMMC so moving SD definition..."
|
||||
fdt resize
|
||||
fdt dup /soc@01c00000/ sdmmc@01c0f000 sdmmc@01c0f001
|
||||
fdt rm /soc@01c00000/sdmmc@01c0f000/
|
||||
fi
|
||||
|
||||
if test "${boot_filename}" = ""; then
|
||||
# boot regular kernel
|
||||
if fatload mmc ${boot_part} ${initrd_addr} recovery.txt; then
|
||||
echo Using recovery...
|
||||
setenv initrd_filename "${recovery_initrd_filename}"
|
||||
fi
|
||||
echo "Loading kernel and initrd..."
|
||||
run load_kernel load_initrd boot_kernel
|
||||
else
|
||||
# check if recovery.txt is created and load recovery image
|
||||
if fatload mmc ${boot_part} ${initrd_addr} recovery.txt; then
|
||||
echo Loading recovery...
|
||||
fatload mmc ${boot_part} ${initrd_addr} ${recovery_filename}
|
||||
else
|
||||
echo Loading normal boot...
|
||||
fatload mmc ${boot_part} ${initrd_addr} ${boot_filename}
|
||||
fi
|
||||
|
||||
# boot android image
|
||||
boota ${initrd_addr}
|
||||
fi
|
||||
|
||||
if test "${olimex_model}" = "teres"; then
|
||||
echo "Booting for Teres-I"
|
||||
fi
|
||||
|
||||
Loading…
Reference in New Issue
Block a user