diff --git a/ArtificialAtmosphere.FCStd b/ArtificialAtmosphere.FCStd
index 2bc97f9..4c8ffa0 100644
Binary files a/ArtificialAtmosphere.FCStd and b/ArtificialAtmosphere.FCStd differ
diff --git a/FEM/FEM_pressure_acrylic_glass.FCStd b/FEM/FEM_pressure_acrylic_glass.FCStd
new file mode 100644
index 0000000..77aa774
Binary files /dev/null and b/FEM/FEM_pressure_acrylic_glass.FCStd differ
diff --git a/FEM/FEM_pressure_soda-lime-glass.FCStd b/FEM/FEM_pressure_soda-lime-glass.FCStd
new file mode 100644
index 0000000..684bc33
Binary files /dev/null and b/FEM/FEM_pressure_soda-lime-glass.FCStd differ
diff --git a/FEM/zz-README.org b/FEM/zz-README.org
new file mode 100644
index 0000000..f19922b
--- /dev/null
+++ b/FEM/zz-README.org
@@ -0,0 +1 @@
+This directory is used to store relevant FEM files for this project
diff --git a/acceptable_materials.md b/acceptable_materials.md
new file mode 100644
index 0000000..eadae18
--- /dev/null
+++ b/acceptable_materials.md
@@ -0,0 +1,38 @@
+
+--- WORK IN PROGRESS RESOURCE! DO NOT USE IN PRODUCTION! ---
+
+This is a list of materials that are acceptable for the chamber construction:
+
+## Acknowledgements
+
+The standard biggest wall is 1000x800 mm with pressure of 25 Pascals and projected use of heated magnetic stirrer set to max temperature 393.15 K (120 C) in an enviroment where it may be exposed to various chemicals, thus the requirements are set as follows:
+
+Transparent solid material plate 1200x1000 mm with thickness ranging from 1.00 mm to 3.00 mm (max 5.00 mm) with weight less than 2 kg in a common earth environment subjected to pressure of 35 Pascals at continuous operating temperature 423.15 K (150 C) not surpassing plasticity (permanent deformation of the material) with displacement less than 0.50 μm for at least 10 minutes with chemical resistance to common chemical substances. Non-transparent material may be used with combination of transparent material for the Window plate to enable operation.
+
+## Compatible Materials
+
+### Poly Ether Ether Ketone (PEEK)
+
+Material is compatible with requirements, but may require additives for transparency[1] or use with transparent material for window plate.
+
+### Polyetherimide (PEI)
+
+Amber-to-transparent solid, may not be a good option if it's transparency impairs operation which is unlikely to do.
+
+It is prone to stress cracking when exposed to chlorinated solvets[2], if application includes these then it's chemical markup needs to be handled appropriately (additives to manage this issue).
+
+### Polysulfone (PSU)
+
+Material is compatible with requirements, but note that it is known to dissolve in dichloromethane and methylpyrrolidone[3].
+
+## Incompatible materials
+
+### Acrylate polymer (acrylic glass)
+
+It's Continuous Operating Temperature is around 348.15 K (75 C) which is not suitable for the use with heater element inside the acrylic for a long period of time. Projected failure is plasticity if the chamber is pressurized or formation of bubbles due to the overheat of the material.
+
+## References
+
+1. Research paper on "Transparency enhancement in semicrystalline PEEK through variation of polymer morphology" -- https://onlinelibrary.wiley.com/doi/10.1002/(SICI)1099-0488(199603)34:4%3C707::AID-POLB11%3E3.0.CO;2-L
+2. Wikipage on the properties of Polyethermide -- https://en.wikipedia.org/wiki/Polyetherimide#Properties
+3. Wikipage on the properties of Polysulfone -- https://en.wikipedia.org/wiki/Polysulfone#Properties
diff --git a/img/zz-README.org b/img/zz-README.org
new file mode 100644
index 0000000..094dd85
--- /dev/null
+++ b/img/zz-README.org
@@ -0,0 +1 @@
+Used for various audio-visual materials used in the project